« previous next »
Pages: [1] 2

Author Topic: Need a bandsaw advice  (Read 5638 times)

0 Members and 1 Guest are viewing this topic.

Offline druid

  • Member
  • Posts: 475
Need a bandsaw advice
« on: December 14, 2011, 03:15:34 pm »
For a few days I will probably take a bandsaw. I havent see it yet but it has 12-14" wheels and 6" opened mouth for wood inserts. It is strong construction but do not have electromotor. Is 1,5-2 kW motor strong enough for this bandsaw?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Need a bandsaw advice
« Reply #1 on: December 14, 2011, 03:22:06 pm »
My 14" saw has a 1 horepower motor on it. It doesnt slow down for anything!
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Need a bandsaw advice
« Reply #2 on: December 14, 2011, 04:06:44 pm »
Druid
That should be fine !
Guy
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline John D

  • Member
  • Posts: 107
Re: Need a bandsaw advice
« Reply #3 on: December 14, 2011, 04:44:33 pm »
1.5KW is approximately 2 hP and should be sufficient for a 14" bandsaw.   You'll also want to make sure you have the motor speed (RPM) close to correct for the saw (or figure out how to step it up or down)  Can you determine the manufacturer?  are they still in operation?  Perhaps the power and speed specs for the appropriate motor are in an online manual somewhere.

Also a suggestion: See if you can get specs on blade length in advance and find out if your machine uses stock sized blades or if you'll always be purchasing custom blades.  Maybe not a deal-breaker, but something that is good to know going into the purchase.
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Need a bandsaw advice
« Reply #4 on: December 14, 2011, 05:03:59 pm »
Quote from: PEARL DRUMS on December 14, 2011, 03:22:06 pm
My 14" saw has a 1 horepower motor on it. It doesnt slow down for anything!
Horepower? Someone stop me before I say something which will get me barred >:D
Del
Logged
Health warning, these posts may contain traces of nut.

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: Need a bandsaw advice
« Reply #5 on: December 14, 2011, 06:45:51 pm »
Quote from: Del the cat on December 14, 2011, 05:03:59 pm
Quote from: PEARL DRUMS on December 14, 2011, 03:22:06 pm
My 14" saw has a 1 horepower motor on it. It doesnt slow down for anything!
Horepower? Someone stop me before I say something which will get me barred >:D
Del
   

I have said it before but.. bad bad kitty!
Logged
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Grunt

  • Guest
Re: Need a bandsaw advice
« Reply #6 on: December 15, 2011, 10:59:00 am »
Quote from: ErictheViking on December 14, 2011, 06:45:51 pm
Quote from: Del the cat on December 14, 2011, 05:03:59 pm
Quote from: PEARL DRUMS on December 14, 2011, 03:22:06 pm
My 14" saw has a 1 horepower motor on it. It doesnt slow down for anything!
Horepower? Someone stop me before I say something which will get me barred >:D
Del
   

I have said it before but.. bad bad kitty!
Advice is find Timberwolf bandsaw blades for what ever saw you end up with. If you really want more horepower find a decent plimp.
Logged

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: Need a bandsaw advice
« Reply #7 on: December 15, 2011, 12:36:34 pm »
If you buy one off of craigslist make sure it is not three phase if you do not have three phase...

Cipriano
Logged
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline druid

  • Member
  • Posts: 475
Re: Need a bandsaw advice
« Reply #8 on: December 15, 2011, 01:40:41 pm »
Thanks for advices men, it helps me a lot.  ;) Tommorow I go to see and make some pics of that bandsaw.
Logged

Offline druid

  • Member
  • Posts: 475
Re: Need a bandsaw advice
« Reply #9 on: December 16, 2011, 05:52:29 pm »
This old monster. Need some reparation and sending, painitng. 12" wheels.

Logged

Offline dbb

  • Member
  • Posts: 745
Re: Need a bandsaw advice
« Reply #10 on: December 16, 2011, 08:17:40 pm »
Its hard to see on the pics but are there some kind of adjustable guides for the band above and under the workarea?
It will be hard to make precise cuts if you dont have good guides.Preferably with some kind of ballbearings supporting the back and sides of the band.

/Mikael
Logged
It's better to ask and look like a fool than not to ask and remain one...

Offline Buckeye Guy

  • Member
  • Posts: 3,033
Re: Need a bandsaw advice
« Reply #11 on: December 17, 2011, 06:52:17 pm »
Not sure what you have there, looks like most of it is missing !
Logged
Guy Dasher
The Marshall Primitive Archery Rendezvous
Primitive Archery Society
Having  fun
To God be the glory !

Offline druid

  • Member
  • Posts: 475
Re: Need a bandsaw advice
« Reply #12 on: December 19, 2011, 02:28:05 pm »
dbb, I have to make guides and a lot of smaller parts.
Now I found on internet that on wheels small like this blade should be thinner than on bigger wheels because compression stress. How thin I need for these wheels, 0,3mm (1/80")?
Logged

Offline Keenan

  • Member
  • Posts: 4,824
Re: Need a bandsaw advice
« Reply #13 on: December 19, 2011, 05:37:45 pm »
 Druid, Looks like it should work. I have an older bandsaw that I refurbished as well. It has 10" wheels. It works with standard blades but they do break down faster because of the flexing. I would start with a regular blade and see how they do. Sometimes I'll get 20- 30 staves roughed out with a $10.00 blade and other times may only be half a dozen. ::) I have thought about getting bigger wheels but since I'm not roughing staves everyday I haven't worried about it
Logged

Offline druid

  • Member
  • Posts: 475
Re: Need a bandsaw advice
« Reply #14 on: December 20, 2011, 06:00:34 am »
Keenan what is standard blade? Some experts said that for 12" wheels 0.02" thick blade is right.
Logged
Pages: [1] 2
« previous next »