« previous next »
Pages: [1]

Author Topic: Knife for brother in law  (Read 2313 times)

0 Members and 1 Guest are viewing this topic.

Offline dbb

  • Member
  • Posts: 745
Knife for brother in law
« on: December 10, 2011, 11:31:51 pm »
I make knives from time to time,mostly for family and friends.
Here is one i just made for my brother in law.

Buffalo and moose with black and white spacers and nicklesilver in the front.
The blade i bought from a very good swedish smith,you can check out his work at http://www.gen-smide.sa/indexeng.html
It is just over 4" and total lenght is just under 9".

/Mikael
« Last Edit: December 11, 2011, 10:11:41 pm by mullet »
Logged
It's better to ask and look like a fool than not to ask and remain one...

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: Knife for brother in law
« Reply #1 on: December 11, 2011, 07:10:23 pm »
Nice looking knife!
Logged
Aim Small...Hit Small

Offline sadiejane

  • Member
  • Posts: 1,030
Re: Knife for brother in law
« Reply #2 on: December 12, 2011, 11:41:32 am »
nice work.
really like that handle.
and love those swedish style knives
Logged
wild women don't get the blues

Offline Catahoula

  • Member
  • Posts: 222
Re: Knife for brother in law
« Reply #3 on: December 13, 2011, 10:16:41 pm »
Hi,

Do you have another link to the blade maker's work...my mac can't find it!

Rand
Logged
“You only live once, but if you do it right, once is enough.”― Mae West

TurtleCreek

  • Guest
Re: Knife for brother in law
« Reply #4 on: December 15, 2011, 02:46:53 pm »
Nice work.  How did you get the top portion of the sheath to look like that? Is it carved?
Logged

Offline dbb

  • Member
  • Posts: 745
Re: Knife for brother in law
« Reply #5 on: December 16, 2011, 08:52:47 am »
TurtleCreek There is no carving just thinned down,folded over and the line is made with pressure when wet.
There is also a partial woodsheath of soft fir in the lower part just covering the blade.

@ Catahoula
The link was killed by admin because he sell stuff from the site,but you can search for gen-smide and you will find it.

/Mikael
« Last Edit: December 16, 2011, 03:11:03 pm by dbb »
Logged
It's better to ask and look like a fool than not to ask and remain one...
Pages: [1]
« previous next »