« previous next »
Pages: [1]

Author Topic: metal to wood bond  (Read 6526 times)

0 Members and 1 Guest are viewing this topic.

Offline taxus_bacata

  • Member
  • Posts: 49
metal to wood bond
« on: August 17, 2007, 12:12:52 am »
I need advice on which glue to use to stick wood to metal.  I am refering to glueing a metal point on a wooden shaft. The point is to be slid down a groove in the tip of the shaft and I need the bond between them to be unseperable... thanks a lot!!!!
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: metal to wood bond
« Reply #1 on: August 17, 2007, 12:32:03 am »
  If you want it inseperable,well this isn't primitive.Use epoxy and then wrap it with sinew or some kind of cordage.But no matter what glue you use,bonding steel to wood is never compatible.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: metal to wood bond
« Reply #2 on: August 17, 2007, 12:34:11 am »
If you are talking about mounting a trade point, 2ton epoxy mixed with fine sawdust works well or pitch glue if you want it more natural. A good wrap if sinew, artificial sinew or silk thread set in glue will do the trick.  ;)     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »