Primitive Archer
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Home
Help
Search
Calendar
Login
Register
Primitive Archer
»
Main Discussion Area
»
English Warbow
»
Installing horn nocks
« previous
next »
Print
Pages: [
1
]
Author
Topic: Installing horn nocks (Read 13518 times)
0 Members and 1 Guest are viewing this topic.
Badger
Member
Posts: 8,124
Installing horn nocks
«
on:
July 09, 2007, 12:57:49 am »
Vaving some problem bracing my bow since I put the horn nocks on, If I use a stringer it wants to rip them loose, how far does the wood go into the horn normally, I made mine about 1" but am thinking I need more, Steve
Logged
Garry
Guest
Re: Installing horn nocks
«
Reply #1 on:
July 09, 2007, 04:30:13 am »
It's all about angles, you want it as low as possible, try using a shorter stringer.
Logged
Kviljo
Member
Posts: 488
Archaeologist, Antitheist
Re: Installing horn nocks
«
Reply #2 on:
July 09, 2007, 09:49:17 am »
On the MR-bows, the wood has gone about 2" into the nock, with the string-groove about 1" from the bottom of the nock.
Logged
Pat B
Administrator
Member
Posts: 37,637
Re: Installing horn nocks
«
Reply #3 on:
July 09, 2007, 12:29:31 pm »
Steve, On my war bow the tip goes about 3/4" to 1" into the horn. I added a second groove about the string groove and used a longer string as a bow stringer. That worked well for me. Be careful with cut type stringers they will break the horn nock off the tip. Pat
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
Badger
Member
Posts: 8,124
Re: Installing horn nocks
«
Reply #4 on:
July 09, 2007, 07:18:52 pm »
I like that idea of a second string groove, that would work very well, Maybe I will go in about another 1/4" and then add an extra groove. Steve
Logged
Pat B
Administrator
Member
Posts: 37,637
Re: Installing horn nocks
«
Reply #5 on:
July 10, 2007, 01:39:32 am »
I believe it is traditional anyway!
Pat
Logged
Make the most of all that comes and the least of all that goes! Pat Brennan Brevard, NC
Loki
Member
Posts: 381
Re: Installing horn nocks
«
Reply #6 on:
July 10, 2007, 03:54:58 am »
If you use the stringers with the little bags on the ends you may snap the nocks off,the extra groove is the way to go with these thing's.
Logged
Durham,England
Garry
Guest
Re: Installing horn nocks
«
Reply #7 on:
July 10, 2007, 05:16:38 am »
My mistake, I assumed that you were using second string grooves. Don't know of anyone who uses pocket type stringers with horn nocks, bad things are just going to happen. You only need a second groove on the upper as the lower loop can use the same groove as your bow string. My stringer is 12" longer than the bow, works just fine.
Logged
DBernier
Guest
Re: Installing horn nocks
«
Reply #8 on:
July 10, 2007, 08:24:36 pm »
Badger, I have a bow with the second string groove on the nocks and it works slick. If you are at Pat's in a couple of weeks you will see it.
Dick
Logged
justice66
Guest
Re: Installing horn nocks
«
Reply #9 on:
July 18, 2007, 07:27:15 pm »
Badger,I recently broke my horn nock off,I prefer the double cutnock,one for string the other for the stringer,works better,TJ
Logged
mullet
Global Moderator
Member
Posts: 22,913
Eddie Parker
Re: Installing horn nocks
«
Reply #10 on:
July 22, 2007, 09:31:53 pm »
Steve,on the last yew long bow I made I also drilled and pinned the horn knocks to be on the safe side.
Logged
Lakeland, Florida
If you have to pull the trigger, is it really archery?
Rod
Guest
Re: Installing horn nocks
«
Reply #11 on:
July 30, 2007, 06:27:01 am »
It should be enough to ensure that you have a tight fitting taper of sufficient length.
A properly fitted nock will even stay in place without glue, though it would make stringing more interesting.
But never apply pressure to the horn where it is not amply supported by the internal cone of wood.
A major fault is to make a short convex cone as is sometimes shown in some instructions.
Make the cone as long as possible and flat sided in profile, and as snug and tigh a fit as you can manage.
Glue should not be regarded as a filler for an ill fitting nock.
The sign of a good bowyer is an elegant tight fitting nock with a seamless transition from limb to horn.
Rod.
Logged
Print
Pages: [
1
]
« previous
next »
Primitive Archer
»
Main Discussion Area
»
English Warbow
»
Installing horn nocks