« previous next »
Pages: [1]

Author Topic: cutting antler for knives  (Read 3638 times)

0 Members and 1 Guest are viewing this topic.

Offline mspink

  • Member
  • Posts: 213
cutting antler for knives
« on: November 17, 2011, 12:49:13 am »
hey guys was wondering what you guys use to cut and shape antler for making knife handles.
Logged
Aim small miss small!

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: cutting antler for knives
« Reply #1 on: November 17, 2011, 12:57:55 am »
Hacksaw or bandsaw works pretty good.  After that you can use rasps, files, and a sharp knife for shaping.  If you work down into the spongy interior, soak it with thin superglue and let cure before continuing.

Don't inhale the dust, bad for the lungs.  'Sides, it stinks.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline Tower

  • Member
  • Posts: 2,298
Re: cutting antler for knives
« Reply #2 on: November 17, 2011, 01:01:42 am »
I prefer a band saw. Its the easiest to use. It also does a great job!
Logged
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline mspink

  • Member
  • Posts: 213
Re: cutting antler for knives
« Reply #3 on: November 17, 2011, 01:23:17 pm »
it doesnt dull the bandsaw?
Logged
Aim small miss small!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: cutting antler for knives
« Reply #4 on: November 17, 2011, 01:38:55 pm »
Not if you take it slow and don't force the antler through. I use my bandsaw all the time for making tip overlays and a few knife handles.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline YosemiteBen

  • Member
  • Posts: 1,952
Re: cutting antler for knives
« Reply #5 on: November 17, 2011, 09:14:50 pm »
Bandsaw works good - you can dedicate one blade to cutting antler.  A dremel or craft tool works well too.  they make fiberglass reinfoced cutting wheels and burr grinders that work. a cut off wheel on an angle grinder will do as well.
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: cutting antler for knives
« Reply #6 on: November 17, 2011, 10:29:53 pm »
Bandsaw and 1" belt sander to fine tune,
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: cutting antler for knives
« Reply #7 on: November 18, 2011, 08:35:35 am »
Bandsaw/belt sander  to start:) Fine File and sand paper for the finish work.  :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline YosemiteBen

  • Member
  • Posts: 1,952
Re: cutting antler for knives
« Reply #8 on: November 18, 2011, 01:37:25 pm »
you could also look fro a metal band saw blade - they are a little bit harder than wood blades. My angle grinder works well when shaping the antler depending on what you want.
Logged

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: cutting antler for knives
« Reply #9 on: November 18, 2011, 09:08:18 pm »
Before I got my bandsaw, I used to use a saber saw for that stuff.
Logged
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: cutting antler for knives
« Reply #10 on: November 21, 2011, 02:12:25 am »
Tryd usen the bench grinder, P U it stunk up the shop bad :P
Logged
Is this bow making a sickness? or the cure...

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: cutting antler for knives
« Reply #11 on: November 21, 2011, 08:00:09 am »
Yea, both antler and bone are real stinky when being worked.  I used a band saw on the antler handle I just did.

George
Logged
St Paul, TX

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: cutting antler for knives
« Reply #12 on: November 22, 2011, 04:18:39 am »
I use a band saw  with a wood cutting blade for resawing.  It's big agressive teeth.  The heat is the issue.  The agressive blade cutts quickly before the bone gets hot.

Then I use a 50Grt sanding belt on a sanding drum that I made for my lathe.  I run it on a low speed  to reduce the heat friction.  after that it's files and sand paper.  It's not a bad process. 

Unfortunately that grinding stone is probably impregnated and will now stink when used with anything till it all burns out.
Logged

Offline Bill Skinner

  • Member
  • Posts: 384
Re: cutting antler for knives
« Reply #13 on: November 23, 2011, 10:14:17 pm »
And if you don't have a bandsaw, you can soak it in water for a week and use a rasp and a rat tail file.  It will smell like rotten meat while it is wet but the smell will go away when it dries.  Use vinegar to get the smell off your hands.
Logged

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: cutting antler for knives
« Reply #14 on: November 24, 2011, 12:23:31 am »
10-4 on the wheel being plugged ...live and learn  ::)
Logged
Is this bow making a sickness? or the cure...
Pages: [1]
« previous next »