« previous next »
Pages: [1]

Author Topic: curly maple?  (Read 1197 times)

0 Members and 1 Guest are viewing this topic.

Offline amishfoot

  • Member
  • Posts: 35
curly maple?
« on: November 03, 2011, 11:32:51 pm »
Hi i just found some curly maple pretty cheap and in the spur of the moment i bought it. Now i am wandering whether or not it is a good wood for bow limbs? Advice? If its not im am going to glue chuncks together and make risers out of it. PLEASE HELP so i can get started!!:)
Logged
The things I make may be for others, but how I make them is for me

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: curly maple?
« Reply #1 on: November 04, 2011, 12:29:18 am »
it can be done , the curly grain tends to be tricky and compression issues can come up , but it is possible . however i wouldnt want to mess with it untill i had some expirence. pick a tough wood that can handle some imperfections on the first couple . hickory ,white oak ,osage ,hard maple
Logged

Offline amishfoot

  • Member
  • Posts: 35
Re: curly maple?
« Reply #2 on: November 04, 2011, 12:00:39 pm »
that looks awesome thank you! ill probably save a coulple staves and make one later.
Logged
The things I make may be for others, but how I make them is for me

Offline amishfoot

  • Member
  • Posts: 35
Re: curly maple?
« Reply #3 on: November 12, 2011, 12:55:50 pm »
would it also work for arrows?
Logged
The things I make may be for others, but how I make them is for me

Offline dbb

  • Member
  • Posts: 745
Re: curly maple?
« Reply #4 on: November 12, 2011, 01:15:04 pm »
Im a rookie at this but i would say no.Due to the small diameter of an arrow a "curl"would be a serious weak spot in a shaft.
And even if im wrong there are many better and cheaper alternatives...unless its a oneoff showpiece that never will be shot.

/Mikael
Logged
It's better to ask and look like a fool than not to ask and remain one...
Pages: [1]
« previous next »