« previous next »
Pages: [1]

Author Topic: quess what's wrong here, fixed pics added  (Read 1890 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
quess what's wrong here, fixed pics added
« on: November 05, 2011, 09:34:56 pm »

this was gonna be my christmas x-change, both the outside woods are good in tension, just bent the wrong way, Bub
« Last Edit: November 07, 2011, 07:18:24 pm by bubby »
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: quess what's wrong here
« Reply #1 on: November 05, 2011, 10:03:10 pm »
Working late or in a rush? 

I try to make time to stop and think things through.  I also pre align everything and mark an "A" and a "B" on the end grain so that I don't get laminations flipped around.

 :P ::) :o :P :-* :'( >:D O:) :laugh:

(my 4 year old in my lap loves the wingdings. . . . sorry.
Logged

Offline aznboi3644

  • Member
  • Posts: 802
Re: quess what's wrong here
« Reply #2 on: November 05, 2011, 10:05:54 pm »
I'd just heat it till the glue lets go and glue up again.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: quess what's wrong here
« Reply #3 on: November 05, 2011, 10:41:41 pm »
i had them all alined right, just had a brain fart and put them on the form upside down, i'll just put them aside for now and make some new ones, and get back to these when the bad juju where's off ::), Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline mole

  • Member
  • Posts: 75
Re: quess what's wrong here
« Reply #4 on: November 06, 2011, 10:47:36 am »
If that's titebond or a similar glue you can take that apart with a heat gun and a knife.

John
Logged
Northeast Georgia

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: quess what's wrong here
« Reply #5 on: November 06, 2011, 05:51:12 pm »
If it's Urac 185 you probably can't.  I've run the band saw down the seam line and cleaned it up on a belt sander with good success.  I don't post my brain farts.  O:)

Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: quess what's wrong here
« Reply #6 on: November 06, 2011, 11:53:44 pm »
not to worry guy's, when i get aroud to fixn my *#@*-up i'll post it before and after, and if i didn't post my brain farts, i'd do a lot less posting ::),Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bubby

  • Member
  • Posts: 11,054
Re: quess what's wrong here
« Reply #7 on: November 07, 2011, 07:17:39 pm »
here's the results of the fix, backing is quarter sawn gray elm and it's glued up with urac, so i marked the sides and hit the beltsander. and before it's done i won't have the ugly bolt showing, Bub


got the backing down to approximatlly 1/8"
« Last Edit: November 08, 2011, 07:43:36 am by bubby »
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: quess what's wrong here, fixed pics added
« Reply #8 on: November 07, 2011, 07:28:57 pm »
that looks like it will be amazing, sooo....... im guessing you wont say draw length or weight ::)
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline bubby

  • Member
  • Posts: 11,054
Re: quess what's wrong here, fixed pics added
« Reply #9 on: November 07, 2011, 07:37:57 pm »
actually I'm not shure it'll make the draw lenght i'm shooting for, so i'll get somethig else in the work's just in case, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline DLH

  • Member
  • Posts: 400
Re: quess what's wrong here
« Reply #10 on: November 07, 2011, 08:30:50 pm »
Quote from: Prarie Bowyer on November 06, 2011, 05:51:12 pm
If it's Urac 185 you probably can't.  I've run the band saw down the seam line and cleaned it up on a belt sander with good success.  I don't post my brain farts.  O:)

Sorry if I'm highjacking but could you heat treat after gluing up with Urac 185?
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: quess what's wrong here, fixed pics added
« Reply #11 on: November 07, 2011, 09:30:35 pm »
i think your better off doing it before glue up or not at all, jmho, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹
Pages: [1]
« previous next »