« previous next »
Pages: [1]

Author Topic: white oak  (Read 2056 times)

0 Members and 1 Guest are viewing this topic.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
white oak
« on: October 31, 2011, 02:14:27 am »
hi, i was wondering how white oak would do in a elb style, it would be from a stave. it would be from a  branch of huge tree on a property we are selling, it must be 200 years old at least
also, what properties does this wood have, and what weight can i safely obtain
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline bubby

  • Member
  • Posts: 11,054
Re: white oak
« Reply #1 on: October 31, 2011, 05:08:01 am »
i don't know about an elb, but it makes a great self bow, and a great backer as well, can't hardly break it, in fact i ain't broke it yet, course you probablly want a 200# bow and i can't vouch for it above 70#, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: white oak
« Reply #2 on: October 31, 2011, 11:30:26 am »
White oak is strong with nice even grain as a rule. In an ELB it is  kind of slow and will take set. Don't know for sure how heavy a bow it can make. Good luck.
Logged
" To be, or not to be"...decisions, decisions, decisions.

mikekeswick

  • Guest
Re: white oak
« Reply #3 on: October 31, 2011, 12:13:48 pm »
I'd go for a fairly heavily trapped back, heat treated belly and make it long (78ish). It won't fail in tension anyway!
Logged

Offline adb

  • Member
  • Posts: 5,339
Re: white oak
« Reply #4 on: October 31, 2011, 01:05:27 pm »
White oak makes a decent backing. Nearly as good as hickory.
Logged

Offline Matt S.

  • Member
  • Posts: 380
Re: white oak
« Reply #5 on: October 31, 2011, 01:11:17 pm »
Lots of good advice so far. I'll throw my 2 cents in...
If you want to make a heavy bow (warbow), and knowing you that's your plan ;) I'd be sacrilegious and make the bow with a flat belly and crowned or trapped back . . . . the exact opposite of the ELB cross section. Though I have no experience with this wood or warbows, I would guess with this cross section and a very long (78" +) stave you could make one hefty bow.

Best of luck and keep us updated.
Logged

TurtleCreek

  • Guest
Re: white oak
« Reply #6 on: October 31, 2011, 02:09:13 pm »
  What kind of draw weight are you looking to get out of it?
Logged

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white oak
« Reply #7 on: October 31, 2011, 02:50:53 pm »
thanks foe all the info, as far as weihgt goes, i just want to make it at the upper reaches of what the wood can handle, nothing specific, if it can only handle 70, thats fine, but so is 150 >:D
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

TurtleCreek

  • Guest
Re: white oak
« Reply #8 on: October 31, 2011, 03:15:21 pm »
  I have a hickory english longbow blank but It certainly wouldn't be able to get that high in draw weight, maybe 45 to 50 pounds at most.
Logged

Offline aznboi3644

  • Member
  • Posts: 802
Re: white oak
« Reply #9 on: October 31, 2011, 03:25:43 pm »
If you do a search in the warbow section there is a bamboo backed white oak ELB that is around 120lbs draw weight IIRC
Logged
Pages: [1]
« previous next »