Author Topic: Reducing moisture in a hickory stave  (Read 2556 times)

0 Members and 1 Guest are viewing this topic.

Offline Lee Lobbestael

  • Member
  • Posts: 465
Reducing moisture in a hickory stave
« on: October 23, 2011, 05:26:16 pm »
Ok I have a floor tillered hickory stave that I have dried in my attic for a few months. I want to finish the bow but I think the moisture content may still be a little high and I don't have moisture meter to check it. I have access to a big tall oven at work but can only use it over night. Will one night of baking it bring the moisture content down to the right level? If so what temp should I bake it at?

mikekeswick

  • Guest
Re: Reducing moisture in a hickory stave
« Reply #1 on: October 23, 2011, 05:32:03 pm »
Now that it's fairly dry air flow will really help.
I'd go for a nice low temp if using the oven and do it slowly over two nights rather than trying to rush it in one.
Being hickory it can stand lower mc than most.

Offline PeteC

  • Member
  • Posts: 2,014
Re: Reducing moisture in a hickory stave
« Reply #2 on: October 23, 2011, 06:08:36 pm »
Lee ,do you have access to an accurate scale. I weigh mine .After the stave has lost no weight for a week,and providing it has been kept in a place which is conducive to drying,I start the tillering process. God bless
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas

Offline Lee Lobbestael

  • Member
  • Posts: 465
Re: Reducing moisture in a hickory stave
« Reply #3 on: October 23, 2011, 06:43:21 pm »
unfortunately I don't have a scale that accurate! Just a bathroom scale. Mike, what is a low temp. like around 100F?

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Reducing moisture in a hickory stave
« Reply #4 on: October 23, 2011, 06:49:51 pm »
Walmart sells a digital kitchen scale for $15 that works great for weighing roughed out bows.  It seems to be very accurate.  I weighed a piece of hickory every few days this summer and was able to track it's progress.  Putting it in a hot car dried it the fastest.  It would increase in weight after a couple of days of rain even though it was stored in my workshop.
I started out with nothin' and I still got most of it left

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Reducing moisture in a hickory stave
« Reply #5 on: October 23, 2011, 07:21:40 pm »
I'll have to go get one of those scales, OO!  I had a cheapo moisture meter, but it seems to have taken the proverbial dump. $15 is certainly cheaper than the hundred plus for a decent moisture meter!

Ash is just as bad as hickory for inhaling moisture out of the atmosphere and I am about to start on an ash bow.  Plus I can use it to weight the food for the raptors, too!  If it's in my house it better have several uses!

Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline johnston

  • Member
  • Posts: 976
Re: Reducing moisture in a hickory stave
« Reply #6 on: October 23, 2011, 09:01:39 pm »
LL hic that is too low in MC will blow up.

Lane

Offline Lee Lobbestael

  • Member
  • Posts: 465
Re: Reducing moisture in a hickory stave
« Reply #7 on: October 24, 2011, 09:14:41 am »
Where can you get a cheaper moisture meter?

mikekeswick

  • Guest
Re: Reducing moisture in a hickory stave
« Reply #8 on: October 24, 2011, 09:36:35 am »
Forget the moisture meter - unless you spend a fourtune it won't be accurate. Best bet is a humidity meter with a temperature reading on it. You can get them really cheap with a bit of searching. There is a table in TBB (can't remember which vol?) with temperature and humidity it will tell you the moisture level your wood will reach. Humidity levels where you store your wood are what you need to know.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Reducing moisture in a hickory stave
« Reply #9 on: October 24, 2011, 10:16:17 am »
I just keep mine over an AC/Heater duct in the house when I get it to about bow dimensions, I have a meter but never use it. :)You can tell when it's to wet just by the way it works and if it starts to take set. I will tiller Hickory in 3 or 4 sessions
just for that reason. Slow and easy with drying time in between. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Reducing moisture in a hickory stave
« Reply #10 on: October 24, 2011, 11:03:23 am »
  I do this to all white wood bows exspecially HICKORY. As soon as I get to bending the limbs. I'll put it in the hot box for and hour the first time after that each time I work on the tiller I'll but it in the hot bow for 20 mins. to 1/2 hour. My box has 3 40 watt light bulbs.
   I start out by adding 2 to 3 inchs of reflex while green. And can uselly keep a little reflex. Here's a tip people don't do. I'll but it in the hot box for 1/2 hour before I finish it. Each time it's but in the hot box your getting rid of relitive hummity. Hickorys will suck it up over night.
    Don't leave it in or around heat for long periods of time because it will make it brittle. HICKORYS my favoret bow wood. I've made lots of HICKORY BOWS and have always did this. It dose help with set and string follow.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Reducing moisture in a hickory stave
« Reply #11 on: October 24, 2011, 11:07:49 am »
I use a moisture meter all the time. I keep checking the reading right down to stringing up the stave. Relative  humidity meters work well for measuring relative humidity. Moisture meters work great for measuring mc of wood. Keep in mind the difference between 10 and 12% is 2 in of set. Hickory works well at 6-8%. I do what Pat does but I only make bows in the winter these days.  paid $80 for one about 15 years ago. Use it all the time. Dad taught me to buy good tools to do the things I like to do. Good luck with your relative humidity meters. :) Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Reducing moisture in a hickory stave
« Reply #12 on: October 24, 2011, 11:09:41 am »
I have the mini Ligno and it is about $130 now. But like I said...:) Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Reducing moisture in a hickory stave
« Reply #13 on: October 24, 2011, 11:11:46 am »
If buying  a decent meter is out of the question leave it by heat duct or register for a few weeks. Should be ok. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Reducing moisture in a hickory stave
« Reply #14 on: October 24, 2011, 11:25:13 am »
Osage Outlaw, has an excellent suggestion. Keep checking weight and when it is unchanged for 3 days you are good to go. Jawge
Set Happens!
If you ain't breakin' you ain't makin!