« previous next »
Pages: [1]

Author Topic: Handel this.  (Read 1487 times)

0 Members and 1 Guest are viewing this topic.

Offline Gonzo98

  • Member
  • Posts: 17
Handel this.
« on: October 05, 2011, 02:09:43 pm »
Can I steam bend a handle with a glue on rider. I used Elmers wood glue.
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: Handel this.
« Reply #1 on: October 05, 2011, 02:32:56 pm »
I  wouldn't unless you want to take the riser off, LOL.   :)  :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline Gonzo98

  • Member
  • Posts: 17
Re: Handel this.
« Reply #2 on: October 05, 2011, 10:44:17 pm »
Thanx. :-[
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Handel this.
« Reply #3 on: October 06, 2011, 12:52:27 am »
Heat the handle area up to make the glue release. TB glue will release at 150 deg(F) I guess Elmers would be close to that but you can call their 1-800 number and ask. That's how I found out about TB glues.
  Once you remove the handle heat straighten the bow and replace the handle.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline medicinewheel

  • Member
  • Posts: 3,627
Re: Handel this.
« Reply #4 on: October 06, 2011, 05:25:06 am »
If you heat treat - especially steam - any clue would lose it's integrity sooner or later I would think.
Logged
Frank from Germany...
Pages: [1]
« previous next »