Author Topic: arrow shaft suppliers  (Read 2529 times)

0 Members and 1 Guest are viewing this topic.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
arrow shaft suppliers
« on: September 26, 2011, 11:08:10 pm »
i was wondering if anyone knew of a good supplier of arrow shafts worthy of 130+warbows that are 36 long?
im making a set for my yew warbow and the hickory backed ipe that i will be making soon that will go into the 170lb range for me to train up to
thanks
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: arrow shaft suppliers
« Reply #1 on: September 27, 2011, 12:15:05 am »
 Check out the sponsors down below. I'm sure if you have the money one of them will set you up.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: arrow shaft suppliers
« Reply #2 on: September 27, 2011, 12:18:01 am »
where can i find the sponsor list?
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Justin Snyder

  • Administrator
  • Member
  • Posts: 13,794
Re: arrow shaft suppliers
« Reply #3 on: September 27, 2011, 12:20:37 am »
where can i find the sponsor list?
http://www.primitivearcher.com/smf/index.php/topic,6543.0.html
Scroll to the bottom of the home page and you will see classified adds and distributors. The classified ads are in there.
Everything happens for a reason, sometimes the reason is you made a bad decision.


SW Utah

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: arrow shaft suppliers
« Reply #4 on: September 27, 2011, 12:25:04 am »
thanks
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: arrow shaft suppliers
« Reply #5 on: September 27, 2011, 12:31:28 am »
i was looking and he best for my specifications seems to be the hickory from rudderbows, they get to 130, and are 36 long, but iv'e heard mixed revues of hickory as a shaft, how is it?
either that or the ash shafts from arrow woods.com, not sure what the length is on them though
thanks
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: arrow shaft suppliers
« Reply #6 on: September 27, 2011, 02:31:24 am »
Allaghaney Arrow Wood ,a sponsor has a wide assortment of wood shaft. Give them a call and tell them what you want it for.  I bought some real nice ash shafts from them years ago.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: arrow shaft suppliers
« Reply #7 on: September 27, 2011, 02:41:41 am »
i saw those,they look great, i am thinking either that, or the hickory or poplar from rudderbows
all look so tempting ;D
thanks
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what