« previous next »
Pages: [1]

Author Topic: Standing dead ash  (Read 1073 times)

0 Members and 1 Guest are viewing this topic.

Offline MWirwicki

  • Member
  • Posts: 2,234
  • The wood speaks to you; Listen with your eyes. GSD
Standing dead ash
« on: September 26, 2011, 12:18:35 pm »
Doing a bit of deer scouting over the weekend, I noticed some tall, straight but DEAD ash trees.  Likely from the Emerald Ash Borers but, don't know for certain. 

Has anyone cut intact looking, standing dead ash trees and had any success making a bow with it?
Logged
Matt Wirwicki
Owosso, MI

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Standing dead ash
« Reply #1 on: September 26, 2011, 12:25:57 pm »
I wondered the same Matt. I see no reason it would work. I dont know how deep the bores go, but I bet you could get past the damage. It also would depend on how long it has been dead.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline adb

  • Member
  • Posts: 5,339
Re: Standing dead ash
« Reply #2 on: September 26, 2011, 12:29:24 pm »
I cut dead standing ash a couple of years ago, and it was all firewood. I tried to get a bow out of it, but none of it was any good.
Logged

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: Standing dead ash
« Reply #3 on: September 26, 2011, 12:48:07 pm »
I agree with adb.
Whitwoods will decay very fast.
It will be most strange if you get a usable bow from standing dead ash.

David
Logged
David Key / N.W. Alabama

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,543
Re: Standing dead ash
« Reply #4 on: September 26, 2011, 03:01:35 pm »
I'd use it only for firewood!!!
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »