« previous next »
Pages: [1] 2

Author Topic: Rasp question  (Read 3730 times)

0 Members and 3 Guests are viewing this topic.

Offline NCtrucker87

  • Member
  • Posts: 6
Rasp question
« on: September 25, 2011, 03:10:27 am »
Im about to take on my first self bow, getting my tools and materials gathered now. I'm looking for a good raspto use. From what ive read the ones to get are the Nicholson 49 and 50. Heres the issue, Im kinda strapped for cash dont want to spend $70 on 2 files. If I were to only buy one atm, which would you think would be better, the 49 or the 50, or a different raspall together. Thanks alot for any input.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Rasp question
« Reply #1 on: September 25, 2011, 03:27:32 am »
I have a #49 and like it. I believe it is a bit corser than the #50.   If you know a farrier get one of his used rasps. They usually give them away. I think you can buy one for about $15. Also a 4n1 rasp is hard to beat and was one of my first. Buy them almost anywhere.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Lee Slikkers

  • Member
  • Posts: 1,545
Re: Rasp question
« Reply #2 on: September 25, 2011, 03:35:26 am »
I ran into the same $ issue when I jumped in with both feet...I picked up a Shinto Rasp and have never regretted it.  I've used those high dollar rasps and they are fine but I probably do 90% of my bow work with my Shinto and my scrapers.  Good luck~
Logged
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: Rasp question
« Reply #3 on: September 25, 2011, 12:38:03 pm »
Lee, where do you get a Shinto rasp?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline johnston

  • Member
  • Posts: 976
Re: Rasp question
« Reply #4 on: September 25, 2011, 12:44:17 pm »
PatB is correct as usual. Got an old rasp from my farrier and liked it so well I bought a new one at Tractor Supply for around $24. Have seen China made rasps for $ 10 at my feed store.

You really don't need a whole bunch of tools to make a bow. Draw knife, Stanley Shurform and a coarse file are my main tools. 

Lane
Logged

Offline Postman

  • Member
  • Posts: 1,154
Re: Rasp question
« Reply #5 on: September 25, 2011, 12:57:39 pm »
I agree with johnston - I'm sure the nicholsons are great, but I'd use that money for something else straight off. You can get by with a cheap 4-in one rasp for awhile. The shurform is a cheap effective wood hog. Just be careful of the grain direction - they can tear out fibers if you get too aggressive. Never used a farrier but looking for one.

Make sure your drawknife is good, tho ;)

Good luck!
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: Rasp question
« Reply #6 on: September 25, 2011, 01:07:55 pm »
When out farrier come to do our horses he brings that he no longer uses. He says they are to dull. I hate to think what he thinks sharp :oAny way He just gives them to me. Maybe find a farrier and ask him.
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline Lee Slikkers

  • Member
  • Posts: 1,545
Re: Rasp question
« Reply #7 on: September 25, 2011, 01:35:28 pm »
Quote from: Pat B on September 25, 2011, 12:38:03 pm
Lee, where do you get a Shinto rasp?

Hey Pat, Amazon carries them as does JapaneseWoodWorker or Woodcraft.  They are a "flat" rasp but they are quite a bit different and a solid, hard bodied rasp...they don't clog up and they have a coarse side and a fine side.  I know I'd have to relearn bow making if I couldn't use mine.  Good luck and if you purchase one let me know how you like it.
Logged
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Rasp question
« Reply #8 on: September 25, 2011, 03:05:52 pm »
  You can pick yp old rasps at flea markets. If see a nice on I can uselly pick it up for a dollor or 3.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline NCtrucker87

  • Member
  • Posts: 6
Re: Rasp question
« Reply #9 on: September 25, 2011, 09:13:20 pm »
Thanks for all the info guys, I really appreciate it. I think Im going to just try to get one those stanley shurforms and get by with it for the being. Thanks again!
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: Rasp question
« Reply #10 on: September 25, 2011, 09:49:51 pm »
 Pat;

 I've got a new Shinto Rasp I've never used.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline NCtrucker87

  • Member
  • Posts: 6
Re: Rasp question
« Reply #11 on: September 25, 2011, 11:31:30 pm »
Quote from: mullet on September 25, 2011, 09:49:51 pm
Pat;

 I've got a new Shinto Rasp I've never used.

What size is it and what are you looking to get for it, including shipping. =)
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,913
  • Eddie Parker
Re: Rasp question
« Reply #12 on: September 26, 2011, 09:53:08 am »
It's Pat's, now.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Postman

  • Member
  • Posts: 1,154
Re: Rasp question
« Reply #13 on: September 28, 2011, 02:44:27 pm »
I see 9" and 11"  shintos for sale - is the 9" big enough in y'alls opinion?
Logged
"Leave the gun....Take the cannoli"

John Poster -  Western VA

Offline NCtrucker87

  • Member
  • Posts: 6
Re: Rasp question
« Reply #14 on: October 05, 2011, 12:34:17 am »
I ordered an 11".
Logged
Pages: [1] 2
« previous next »