« previous next »
Pages: [1] 2 3 4

Author Topic: Yew buildalong  (Read 23738 times)

0 Members and 1 Guest are viewing this topic.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Yew buildalong
« on: September 17, 2011, 01:04:35 pm »
i finally got some ;D, im going to need some advide, the stave looks good besides the one knot in the picture, has 1/4 inch of sapwood, and has 24rpi, its also 75inches
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Yew buildalong
« Reply #1 on: September 17, 2011, 01:08:16 pm »
these are this pics
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Yew buildalong
« Reply #2 on: September 17, 2011, 01:22:46 pm »
Beautiful! That only cost you 45 bucks!?! Their site says they sell staves like that for 200 - 250!?! I would take your time with that stave. No need to rush. Thats the kinda stave that will let you sleep sweetly at night after your favorite bow you put 1000's of hours into blows up out of nowhere, knowing you got this beauty tucked away safely.  :laugh: :laugh: :laugh: It is very nice. Looks like you can just remove the bark and make a bow with the sapwood only 1/4". Very nice and straight as well.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Yew buildalong
« Reply #3 on: September 17, 2011, 01:25:53 pm »
what would yew(pun intended :P) do wiht those two knots
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Ian.

  • Member
  • Posts: 470
Re: Yew buildalong
« Reply #4 on: September 17, 2011, 03:03:49 pm »
Yep that is a nice stave, I was going to bid but the postage to the UK put me off.

I would echo the sentient of toomanyknots your don't need to make that bow now, we have seen your bows you seem to be getting the hang of it but why not wait a few years hone your abilities a little and make it then. You will thank yourself for it.
Logged
ALways happy to help anyone get into heavy weight archery: https://www.facebook.com/bostonwarbowsbows/

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Yew buildalong
« Reply #5 on: September 17, 2011, 03:24:14 pm »
i would, but this is the only wood i have right now, and with it being already seasoned now, i probably won't be able to wait, but i am going to take my time and make it perfect. i also have some yew that i am getting from a neighbor so, he had some massive overgrown yew hedges, on of which is starting to die so he is letting me take the whole thing, i haven't seen the specific bush, but my dad says i could make 5 or 6 bows out of it, but back to this stave, how would you recommend working around those 2 knots
btw how much would the postage have been for you, for me it was about 30$
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Yew buildalong
« Reply #6 on: September 17, 2011, 04:17:49 pm »
Hmm, didn't see those knots at first. Leave em proud. Well, I mean don't cut into em. Whatever you do don't violate the wood on them. If you have to use them in the bow, the best bet I would say is to remove the bark and leave em as is, as a kinda character bow. If you have enough room you could try to work around em? Probably don't do ya? If you could also, try to not have it work excessively there either. Probabaly shouldn't be that big of a problem with the length I would think if you do it right. Well anyway I have ZERO experience with yew, so I can't give you too much advice, but this is what I would do with any other wood? GOOD LUCK!
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Yew buildalong
« Reply #7 on: September 17, 2011, 08:28:45 pm »
ok, iv'e made a decision with the knot, the really big one on the edge i will take out, and work around it, give it some character
dont worry though, im going to start shaping out the other side first, all im going to do today is make it more the shape of a bow, debark it
thanks
noel
« Last Edit: September 17, 2011, 08:32:45 pm by fishfinder401 »
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Yew buildalong
« Reply #8 on: September 17, 2011, 08:55:39 pm »
i was just looking very closely at the wood, and while one end has normal growthring density, still a little higher than i was told, according to ym eyes, because of a band of EXTREMELY small growth rings, one part has 70rpi ;D ;D ;D ;D ;D ;D ;D ;D ;D
ill try to take a picture, but im ot sure if they will show up
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline RyanY

  • Member
  • Posts: 1,999
Re: Yew buildalong
« Reply #9 on: September 17, 2011, 10:53:28 pm »
I'd still like to see that ash bow finished up.
Logged

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Yew buildalong
« Reply #10 on: September 17, 2011, 11:06:52 pm »
Quote from: ryoon4690 on September 17, 2011, 10:53:28 pm
I'd still like to see that ash bow finished up.
oops..... ill take the pictures hopefully tomorrow
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline RyanY

  • Member
  • Posts: 1,999
Re: Yew buildalong
« Reply #11 on: September 18, 2011, 03:03:08 am »
I'd bet a good amount of money you won't.  ;)
Logged

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Yew buildalong
« Reply #12 on: September 18, 2011, 03:04:55 am »
ill prove you wrong in 5 minutes while i still remember ::), its done besides maybe a better finish
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: Yew buildalong
« Reply #13 on: September 18, 2011, 03:45:42 am »
i took the bark off tonight and did a little ruff shaping, im trying to figure out the best way around those knots, i'll have a picture of it with what i think drawn out on it, and don't worry im not rushing, I've been going slowly with small hand tools all night, making sure i get the back as perfect, and non cut up as i can
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Yew buildalong
« Reply #14 on: September 18, 2011, 06:00:03 am »
That big knot, top centre of the first pic.
It would be nice if you could aviod that sucker or pit it at the grip maybe.
The smaller one lower left looks small enough to live dead centre in the limb.
Whoops, just saw your earlier post... you've already decided on that!
(I'll shut up and sit back and watch) ;)
Del
BTW, those knot's look good and sound... dang I just cant keep quiet :-[
« Last Edit: September 18, 2011, 06:03:38 am by Del the cat »
Logged
Health warning, these posts may contain traces of nut.
Pages: [1] 2 3 4
« previous next »