Author Topic: anyone interested- kids takedown recurve and machete (im guessing no interest)  (Read 3752 times)

0 Members and 1 Guest are viewing this topic.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
  i have a rogim victory take down recurve, i think it says 62 tip to tip, and 24@28, it has VERY slight limb twist in one limb, doesn't effect the performance as far as i can tell, and i has minimal wear( from what i know it had very little use) when i got it it same with a bow case, some sort of sight, it seems all there except for the mounting screws??? and a long thing you screw into the front( i have no clue of its purpose).
i also have a small machete in a case, it doesn't look like it the best quality, but i figured someone might have a use for it, the case also looks pretty cool.
im not sure what people would trade for this so ill take pretty much anything  can use, if it is worth it to someone, i would like some wood though
thanks for looking
noel
PS: i will dig out the things that go with the bow and take some pictures soon
« Last Edit: September 08, 2011, 12:35:31 am by fishfinder401 »
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,889
  • Eddie Parker
Re: anyone interested- kids takedown recurve and machete
« Reply #1 on: September 05, 2011, 11:11:56 pm »
 That Ragim Victory is actually sold as a training bow in weights up to 40#. The long, skinney thing screws into the brass bushing in the riser. It is a stabilizer bar for target shooting. It is a very reliable, bow for someone wanting to get into target shooting. Oh, yea, the site thing is a Berger button to adjust left and right angle on the arrow.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: anyone interested- kids takedown recurve and machete
« Reply #2 on: September 05, 2011, 11:21:32 pm »
thanks for the info, i would use it myself, but as you can tell its WAY to lite ;D, but when i shot it,it was one of the most accurate bows i had seen
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,889
  • Eddie Parker
 Welllll, Noel. Tell me what kind and how much wood you are looking for. My Grandson likes the machete. ???
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
ill take anything, what kind do you have?
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,889
  • Eddie Parker
 I have a nice Hackberry stave, a Pacific Dogwood stave that has been drieing since 2004 and naturally reflexed, and an osage sapling that would make a real good "bend in the handle" bow, and a short stave of Hophornbeam.

Eddie
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
out of the dogwood and hackberry, which could make the strongest bow and what are their lengths
thanks
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,889
  • Eddie Parker
 Noel;
 Both would make a good, strong bow. The dogwood will be more of a challenge because of the reflex if you don't have a lot of bow making experiance. the hackberry is ready to shape into a bow. Either piece of wood you don't have to worry about following a growth ring.
The hackberry is 64" and the dogwood is 63.5"

Eddie
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
that dogwood sounds good  ;D im always up for a challenge 8),
ill pm you with my address
thanks
noel
PS: i looked up the machete and apparently it actually really good quality,( didn't expect that), but it makes me feel better about trading for a stave
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Mullet sent you a pm

Fish you better do another build allong man ;D
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
unfortunately, the trade with mullet wasn't going to work out for either of us, but my first yew stave is on the way to me right now so there will be a buildalong :)
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what