Author Topic: Static recurve  (Read 5611 times)

0 Members and 1 Guest are viewing this topic.

Offline swamp yeti

  • Member
  • Posts: 640
Static recurve
« on: August 31, 2011, 09:08:58 pm »
This the first bow I have made in a while.The bow is a bamboo backed osage with bamboo stain job, bubinga riser and ebony tip overlays.The bow is 58 inches tip to tip,inch and a half wide and narrows down to half inch at the tips.The bow is 58#@26 inches,with 7 inches of static tips it is a hard hitter.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Static recurve
« Reply #1 on: August 31, 2011, 09:30:59 pm »
 Nice looking bow, you did a real good job on the tiller, a little more on the bottom limb and you would have been in trouble. I'm glad to see ;) you favor pink.
« Last Edit: August 31, 2011, 09:34:22 pm by mullet »
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: Static recurve
« Reply #2 on: August 31, 2011, 10:57:06 pm »
Very Cool! Well done! Did I miss the stain allong you talked about doing at one time? ;D

Josh
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline swamp yeti

  • Member
  • Posts: 640
Re: Static recurve
« Reply #3 on: September 01, 2011, 01:02:03 am »
Thanks Mullet and Josh.

Offline aznboi3644

  • Member
  • Posts: 802
Re: Static recurve
« Reply #4 on: September 01, 2011, 01:39:15 am »
is it me or do those recurves look to be working a bit?

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Static recurve
« Reply #5 on: September 01, 2011, 02:04:03 am »
Looks like it to me.  I'd like to see an unstrung picture.  My trade bow had a tip that looked like that and it definitely bent at full draw.  Mine was more D/R than recurved and this one looks like that to me too.  Either way, a beautiful bow.

George
St Paul, TX

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Static recurve
« Reply #6 on: September 01, 2011, 03:48:48 am »
Beautifull bow!
Frank from Germany...

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Static recurve
« Reply #7 on: September 01, 2011, 05:38:58 am »
Like George says... :)
Del
Health warning, these posts may contain traces of nut.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,198
  • if you have to ask you wouldn't understand ,Tenn.
Re: Static recurve
« Reply #8 on: September 01, 2011, 07:00:43 am »
Nice looking bow,looks like a shooter to me. :)
   Pappy
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

hawkshaman

  • Guest
Re: Static recurve
« Reply #9 on: September 01, 2011, 10:37:31 am »
Looks great. That is a really nice bow. Does it have a home yet?

John

Offline swamp yeti

  • Member
  • Posts: 640
Re: Static recurve
« Reply #10 on: September 01, 2011, 11:43:29 am »
Thanks for the compliments everybody,I put 7 inches of recurve on it and after shooting it a while it lost a lot of it,but the memory is still there.

gutpile

  • Guest
Re: Static recurve
« Reply #11 on: September 01, 2011, 12:53:54 pm »
I don't see any static..looks like flip tips...not sure about the tiller either..appears to bend out the handle and hardly any where else..but I will say I think it is a fine bow...looks like a shooter....gut

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Static recurve
« Reply #12 on: September 01, 2011, 10:13:16 pm »
 You're right, Gutpile, it really is a recurve. For a first bow I'm impressed. There are a few things you can do to it to improve and that is what this site is about. One is clean up the tiller, it was border line hinging, upper limb is tillered, almost like a RF/DF, (folding over at the fade) and the bottom is eliptical like a recurve, and almost hinging. Also, take those tips down a little smaller. That's stuff you start to learn after you have built more than a few. But,, it is Osage and it will probablly shoot forever, and if it was my first one I'd be real happy it was a shooter and looked this good.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

gutpile

  • Guest
Re: Static recurve
« Reply #13 on: September 02, 2011, 12:18:38 pm »
Mullet correct me if I am wrong but since the string does not lay on the limb when strung ...how can it be a recurve.....IMO it is a longbow profile with flipped tips...it has a very nice braced profile.I like it..and I agree for the first bow he did a great job..you can't find a better group of guys than here to learn bow building...I too would be extremely happy with that bow.....and your points are dead on...gut

Offline Dazv

  • Member
  • Posts: 472
Re: Static recurve
« Reply #14 on: September 02, 2011, 04:05:28 pm »
Wow what a great bow I'm sure it will serve you well.