« previous next »
Pages: [1]

Author Topic: Stain over titebond?  (Read 8817 times)

0 Members and 1 Guest are viewing this topic.

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Stain over titebond?
« on: August 07, 2011, 09:00:33 pm »
Can you put a stain over titebond II?  I'm going to lay some cotton fabric over the backing...real light stuff, I mostly want the pattern.  I'm going to lay it down with Titebond II.  Can you put stain over that?  If so, how long does it need to sit before the stain can be applied?
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline Lee Slikkers

  • Member
  • Posts: 1,545
Re: Stain over titebond?
« Reply #1 on: August 08, 2011, 12:38:24 am »
Why not stain the cotton before you glue it down?
Logged
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: Stain over titebond?
« Reply #2 on: August 08, 2011, 12:46:24 am »
I was worried about it adhering.  However, looking at the cotton while it's on the bow after gluing it down, I'm hoping it doesn't stain...I'm going to have to go around it.  It's already a lot darker than I had intended.  The stain might make some of the pattern indiscernible.
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline BowJunkie

  • Member
  • Posts: 283
Re: Stain over titebond?
« Reply #3 on: August 08, 2011, 12:49:15 am »
Try  out the procedures on  pieces of scrap wood first and see how you should proceed.
Just my 2 cents.
Logged
Johnny
in Texas

Offline lowell

  • Member
  • Posts: 939
Re: Stain over titebond?
« Reply #4 on: August 08, 2011, 12:50:14 am »
I doubt the stain will do much through the titebond!!
Logged
My son says I shoot a stick with a stick!!

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: Stain over titebond?
« Reply #5 on: August 08, 2011, 02:34:13 am »
I actually think it didn't do anything to the titebond...a few spots where the glue had run over and I didn't catch to file back down to the wood it barely touched.  The stain did put a nice texture over the cloth, though.  I'll start a thread about it shortly.
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Stain over titebond?
« Reply #6 on: August 08, 2011, 10:06:22 am »
  I know of a guy that said he dyed elmer glue once. Try this and see if you can.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline makenzie71

  • Member
  • Posts: 572
  • I can robin hood an arrow if I hit it just right.
Re: Stain over titebond?
« Reply #7 on: August 08, 2011, 04:29:24 pm »
These glues are essentially water based so they'll dye with any water based dye before they set...that's easy enough.  But I didn't want a colored glue.
Logged
Goodbye, friends. I never thought I'd die like this. But I always really hoped. ~ Fry
Pages: [1]
« previous next »