« previous next »
Pages: [1]

Author Topic: How do i heat bend red oak properly  (Read 5698 times)

0 Members and 1 Guest are viewing this topic.

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
How do i heat bend red oak properly
« on: July 26, 2011, 06:51:22 pm »
Well the name says it all I'm in this read oak challenge and iv never heat shaped a bow before so I figured I'd try it with the red oak bow  im making
Logged
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: How do i heat bend red oak properly
« Reply #1 on: July 26, 2011, 07:06:41 pm »
I had good luck with steam had more failures than successes with the heat gun.   Either way you go good luck!   :)
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: How do i heat bend red oak properly
« Reply #2 on: July 26, 2011, 07:32:06 pm »
What do you use to concentrate the steam
Logged
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: How do i heat bend red oak properly
« Reply #3 on: July 26, 2011, 10:26:57 pm »
big pot and aluminum foil.  Here's a pic I drew.  Don't let the bow rest on the rim of the pot.
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: How do i heat bend red oak properly
« Reply #4 on: July 26, 2011, 11:50:32 pm »
Nice pic I like it ok now how long do you let it steam before you clamp it
Logged
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: How do i heat bend red oak properly
« Reply #5 on: July 27, 2011, 09:01:29 pm »
30-45 minutes if already at floor tillered stage. Probably longer if it is still full thickness... I usually set everything up and bring it to a boil with the bow limb already over the steam... Kinda ease it into getting steamed. I think this is better for it.
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: How do i heat bend red oak properly
« Reply #6 on: July 28, 2011, 12:13:31 pm »
Cool thanx josh  ;)
Logged
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline Matt S.

  • Member
  • Posts: 380
Re: How do i heat bend red oak properly
« Reply #7 on: July 28, 2011, 01:06:30 pm »
Quote from: Josh on July 27, 2011, 09:01:29 pm
30-45 minutes if already at floor tillered stage. Probably longer if it is still full thickness... I usually set everything up and bring it to a boil with the bow limb already over the steam... Kinda ease it into getting steamed. I think this is better for it.

Josh, you made a really nice recurved red oak bow a few months ago. How did you get such dramatic bends for the recurves? Did you do each bend all at once or did it take multiple heat/bend cycles? So far I've only managed about 2" of recurve without breaking.
Logged

Offline Lee Slikkers

  • Member
  • Posts: 1,545
Re: How do i heat bend red oak properly
« Reply #8 on: July 28, 2011, 01:42:30 pm »
What about leaving the tip in a large pot of boiling water for 30+ minutes...heard that boiling works as well or better than steaming?
Logged
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline Stingray45

  • Member
  • Posts: 330
Re: How do i heat bend red oak properly
« Reply #9 on: July 28, 2011, 02:21:58 pm »
I've read the same thing. Just picked up the last two TBB books and in volume III they talk about boiling. I'm thinking of trying it on my red oak board bow for the cookoff. I have a huge pot I got at Sam's club I should be able to get the last 1/3 of the limb in, probably gonna boil it outside on my gril side burner.
Logged
Is there anything better than wandering the earth with a stick and string in your hand?

blackhawk

  • Guest
Re: How do i heat bend red oak properly
« Reply #10 on: July 28, 2011, 02:28:08 pm »
Barry....careful if you try to recurve yours,as I see yours is pretty much at final dimension. If you lift a splinter you wont be happy and then you'll have to sand it out and put a thin underlay on it.
your call tho  ;)
Logged

Offline Josh

  • Member
  • Posts: 3,367
  • Silence is golden but duct tape is silver.
Re: How do i heat bend red oak properly
« Reply #11 on: July 29, 2011, 01:19:54 am »
steam gets hotter than boiling water that's why I chose to steam mine.  One of the TBB's has a pic of a jig you can submerge with the limb into the boiling water and tighten it a little at a time.  If I was going to boil one that is the way I would do it.    The last Red Oak I did I did it just like in my picture above for around 45 minutes and then QUICKLY put it on my form and bent it all at once.  I actually cut it in half at the handle so I could have both limbs over the pot at the same time, LOL.  Call me impatient.  ;D ;D
Logged
“The trouble with quotes on the Internet is you never know if they are genuine.” —Abraham Lincoln
Pages: [1]
« previous next »