Author Topic: Started some poplar arrows  (Read 4061 times)

0 Members and 1 Guest are viewing this topic.

Offline okie64

  • Member
  • Posts: 1,134
Started some poplar arrows
« on: July 01, 2011, 11:49:36 am »
These are some 3/8" dowel rods I bought at lowes. I usually saw up boards and plane them down for arrows but I thought it would be so much easier to use dowel rods if they would fly good. I have used lots of other woods for arrows but this is my first try with poplar and I have to say they shoot great and they seem surprisingly tough! They are 30" long and weigh in at about 650 grains. These are the only 3 I have made up so far but I'm still workin on gettin a few more done.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Started some poplar arrows
« Reply #1 on: July 01, 2011, 11:59:14 am »
   COOL I've used popular shoots a good deal and the are quite tuff and stay staight after tempering them.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Started some poplar arrows
« Reply #2 on: July 01, 2011, 12:02:15 pm »
Them look good. Where about ya at in OK?
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline okie64

  • Member
  • Posts: 1,134
Re: Started some poplar arrows
« Reply #3 on: July 02, 2011, 07:55:31 pm »
Cowboy, I live in Muldrow. Its  on the Arkansas/ Oklahoma stateline just a few miles west of Fort Smith.  You in Oklahoma too?

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Started some poplar arrows
« Reply #4 on: July 03, 2011, 05:27:33 pm »
Very nice looking arrows. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline rover brewer

  • Member
  • Posts: 285
Re: Started some poplar arrows
« Reply #5 on: July 04, 2011, 10:05:21 am »
cool nice job, 650gr what poundage is your bow?
john 3:16

Offline okie64

  • Member
  • Posts: 1,134
Re: Started some poplar arrows
« Reply #6 on: July 06, 2011, 11:04:47 pm »
I've shot them from several different bows but they fly the best out of a 60# osage bow.

Offline wvarcher

  • Member
  • Posts: 214
Re: Started some poplar arrows
« Reply #7 on: July 08, 2011, 10:29:27 pm »
Nice!  I have been buying and saving Poplar dowels From Lowes to make into arrows when i get the time.

Offline Stingray45

  • Member
  • Posts: 330
Re: Started some poplar arrows
« Reply #8 on: July 12, 2011, 12:32:55 am »
Nice, these give me some hope. I am still working on getting my set up all together, just finishing up my arrow spine tester. Got myself a 3/8" Veritas dowel cutter so I can cut myself some square stock from straight grained board, then run through the dowel cutter and then test them out on the spine tester. Do you know what they spine or just weight matching? I know you said they shoot best out of your 60# bow.
Is there anything better than wandering the earth with a stick and string in your hand?

Offline okie64

  • Member
  • Posts: 1,134
Re: Started some poplar arrows
« Reply #9 on: July 13, 2011, 08:37:02 pm »
Sorry Stingray i dont know what spine they are exactly. I just made em and started shootin em out of a 40# bow and worked my way up from there. It worked out pretty good because the bow they shot best out of was going to be my main hunting bow for this year anyways. I need to rig myself up a spine tester its just something I havent gotten around to doing yet.

Offline aznboi3644

  • Member
  • Posts: 802
Re: Started some poplar arrows
« Reply #10 on: July 14, 2011, 12:19:40 am »
what did you use for the wrapping?  Looks like those would cut your hand when shot...or atleast take some skin off.

Offline okie64

  • Member
  • Posts: 1,134
Re: Started some poplar arrows
« Reply #11 on: July 15, 2011, 02:45:25 am »
aznboi, Its just some old string material I had. B-50 I think. I was shooting them from bows with shelves cut in.

Offline aznboi3644

  • Member
  • Posts: 802
Re: Started some poplar arrows
« Reply #12 on: July 15, 2011, 04:09:31 pm »
ahh ic...hands are safe.