Stained Elm ”semi-pyramid”
This one started out as a discarded heavy propellar wych elm stave, so I decided to do some experiments on it.
I corrected the twist by clamping it hard during curing…that corrected it, but it still shows during tiller. I have never done that before so that was a first.
Another first was staining it. I normally dont like staining wood..I prefer the natural beauty. I also decided to try a high gloss poly finish (I normally use linseed oil).
I also experimented with the handle wrap…first, but not last time I will use this design
So this ”bastard” ended up at 58#@28” and 63” ntn, and its fast. The tiller was problematic due to the twist. It looks like there is a hinge 3” below the handle…but when I flip it around its undicernable…well, time will tell;-).
Unstrung
Brace:
Handle:
Draw:
Cheers