« previous next »
Pages: [1]

Author Topic: Elm longbow 70# 29"  (Read 4101 times)

0 Members and 1 Guest are viewing this topic.

Offline druid

  • Member
  • Posts: 475
Elm longbow 70# 29"
« on: June 26, 2011, 09:02:04 am »
One more of my older bows...
This is my first elm longbow. It is 74" ntn, 35 mm wide and 25 mm thick at the handle. Tapering to the 1/2" nocks. I expected this to be more powerfull but this was realy weak stave, I realize after begining. Ended at 70# at 29". Brace is 6" , less than 1 1/2" set. 19 knots on the back and 18 on the belly. One limb has some reflex in the outer half. This is far too long bow for this draw weight but it is not sluggish. As I said- I expected much heavier bow and because that I tilered it like Roy King suggested for this kind of bow- just a little in the middle and more in the midlimbs, to look a little bit whiped. Next time I should listen to brother Pathfinder and check early-latewood ratio, beh.....



Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Elm longbow 70# 29"
« Reply #1 on: June 26, 2011, 09:40:00 am »
I love the row of knots down the back, looks like the Loch Ness monster.
Great tiller as always.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Will H

  • Member
  • Posts: 2,120
Re: Elm longbow 70# 29"
« Reply #2 on: June 26, 2011, 11:38:31 am »
I agree with del. Looks like ol nessy! Great work! :)
Logged
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Elm longbow 70# 29"
« Reply #3 on: June 26, 2011, 12:49:55 pm »
I know I'm told you this on paleoplanet, but I love the way you work those knotty staves. A master of the knotty stave!  ;D Great longbow. I like the nocks too.
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Badger

  • Member
  • Posts: 8,124
Re: Elm longbow 70# 29"
« Reply #4 on: June 26, 2011, 01:04:34 pm »
   Good looking bow, one thing to watch for with elm is that it will hang on to moisture longer than most woods for some reason. I still have an elm longbow that seemed to keep gaining weight for 6 months after I built it. I built the bow at 57# and a month later it was up to 70#. I had to drop the weight a total of 3 times before it stablized.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Elm longbow 70# 29"
« Reply #5 on: June 26, 2011, 01:21:40 pm »
Very cool bow!   8)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: Elm longbow 70# 29"
« Reply #6 on: June 26, 2011, 01:29:32 pm »
Quote from: toomanyknots on June 26, 2011, 12:49:55 pm
I know I'm told you this on paleoplanet, but I love the way you work those knotty staves. A master of the knotty stave!  ;D Great longbow. I like the nocks too.
     Ditto! ;D
Logged
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline DEllis

  • Member
  • Posts: 397
Re: Elm longbow 70# 29"
« Reply #7 on: June 27, 2011, 01:40:04 am »
Awesome!
Darcy :)
Logged
Darcy Ellis
Fort Fraser BC Canada eh!

Offline Gordon

  • Member
  • Posts: 3,299
Re: Elm longbow 70# 29"
« Reply #8 on: June 27, 2011, 03:33:20 am »
You definitely have those long D-style bows down - I love it!
Logged
Gordon
Pages: [1]
« previous next »