« previous next »
Pages: [1]

Author Topic: question about bamboo backing  (Read 1526 times)

0 Members and 1 Guest are viewing this topic.

Offline Blacktail

  • Member
  • Posts: 1,432
question about bamboo backing
« on: June 28, 2011, 03:33:05 pm »
if i was to buy boards for making a bamboo bow...does the grains of the board have to go with the entire length of the board...or does it even matter..thanks john
Logged

Offline Gaur

  • Member
  • Posts: 460
Re: question about bamboo backing
« Reply #1 on: June 28, 2011, 04:17:32 pm »
I think it always helps.  If you have some run offs you still could have the belly split on you.  quarter sawn would work good too.
Logged
"...He made me a polished arrow and hid me in His quiver." Is 49:2

Offline dragonman

  • Member
  • Posts: 1,142
    • virabows.co.uk
Re: question about bamboo backing
« Reply #2 on: June 28, 2011, 05:53:15 pm »
the straighter grain the better, but I have made boo backed bows where the grain runs off and had no problems at all.....
Logged
'expansion and compression'.. the secret of life is to balance these two opposing forces.......

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: question about bamboo backing
« Reply #3 on: June 28, 2011, 08:01:34 pm »
I agree, John.  You can get away with runoffs and other maladies but you're better off with a proper piece of wood.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »