Author Topic: Shoot shafts  (Read 1558 times)

0 Members and 1 Guest are viewing this topic.

Offline agd68

  • Member
  • Posts: 306
Shoot shafts
« on: June 22, 2011, 09:19:08 am »
How do shoot shafts stack up to cane or milled wooden shafts ?
Happiness is..
A wet lab, dirty gun, and a cold beer after a day on the Marsh

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: Shoot shafts
« Reply #1 on: June 22, 2011, 09:51:48 am »
Sourwood shoots are my favorite arrow material. They are very tough, heavy and fly great when made properly.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Shoot shafts
« Reply #2 on: June 22, 2011, 09:05:27 pm »
You can make a shoot look like a dowel but you can't make a dowel look like a shoot.  Cane is in a league by itself.  ;)
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Shoot shafts
« Reply #3 on: June 25, 2011, 01:34:19 am »
   With a thumb plane sand stone sander and 40 grit sandpaper. SO CAN MAKE SHOOTS LOOK LIKE SHAFT ARROW. It's all in the time and patence you want to put into it. Same with cane it's all in what you want.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING