Author Topic: started an osage bow it's on the tree, finished with pics (Read 9894 times)

Elktracker · « **Reply #15 on:** June 25, 2011, 06:15:31 pm »

Ya thats looking very nice so far! keep up the good work!

Josh

Will H · « **Reply #16 on:** June 25, 2011, 07:19:52 pm »

Looks like you took the prop twist out nicely. Good job! Ur almost there!

johnston · « **Reply #17 on:** June 25, 2011, 07:57:16 pm »

bubby your work is always a pleasure to see. Got one question, the C-clamp on the right of the form, is that metal to bow or do you have a pad on the clamp?

Lane

bubby · « **Reply #18 on:** June 25, 2011, 09:27:42 pm »

got a piece of leather glued to the clamp, the others all have pads, Bub

johnston · « **Reply #19 on:** June 25, 2011, 11:37:28 pm »

Gonna try that, thanks.

Lane

Gaur · « **Reply #20 on:** June 26, 2011, 12:48:51 am »

looking good. Did you rub the belly with oil before heating? Looks like you got some scorching. I like to use crisco. Noticed my dog likes it too.

bubby · « **Reply #21 on:** July 05, 2011, 08:22:46 pm »

got some time to do a little scrapping finally,think I gotta get it bending some more midlimb, what do ya think, Bub

bubby · « **Reply #22 on:** July 05, 2011, 08:34:57 pm »

the limb on the left still has some twist, makes it look a little flat

gstoneberg · « **Reply #23 on:** July 05, 2011, 08:43:03 pm »

Hey Bub, looking good. Be careful on that left limb that it doesn't bend too much by the fade until the rest of the limb is working. You're right, the twist is making it hard to get a good read so I could surely be wrong. You're making good progress. Keep up the good work.

George

bubby · « **Reply #24 on:** July 05, 2011, 08:51:03 pm »

thats what I was thinking George, thank's, Bub

Elktracker · « **Reply #25 on:** July 05, 2011, 09:05:17 pm »

Looking good so far thanks for the update!

Josh

Pappy · « **Reply #26 on:** July 06, 2011, 08:04:00 am »

What George said, Looking good,get it bending a little more in the middle and go slow. They will naturally want to bend at the fads till you get the rest of the limb moving and a little set there will show up a lot at the tips.

Pappy

blackhawk · « **Reply #27 on:** July 06, 2011, 10:23:29 am »

Id say more scraping mid limb onto the tips both limbs. But what does the tiller gizmo tell you? This is where a gizmo shines and aids big time when dealing with prop twist. I actually trust it more than a picture when dealing with twist.

bubby · « **Reply #28 on:** August 12, 2011, 04:13:03 am »

got a chance to work on this bow some more, got it to 23" and to full brace, it's like 53# @ 23 and I still need six more inches of draw, want about 60# @ 29" so still gotta drop some #'s, and got the tips narrowed down. string's not centered on the handle but I think it will work, hope to get some arrows through it by the first of the week, Bub

Pappy · « **Reply #29 on:** August 12, 2011, 07:40:17 am »

O ya looking much better now,

:)just keep her even and you have almost got it.You can always tweak it a little with heat if it needs it to line the handle and string if it needs it after you shoot it some. Very nice job.How long is the bow ?
Pappy

Primitive Archer