Author Topic: Maple Board Trade Bow (Was Finished... Now it's pretty firewood!)  (Read 9642 times)

0 Members and 2 Guests are viewing this topic.

Offline DEllis

  • Member
  • Posts: 397
Re: Maple Board Trade Bow (Was Finished... Now it's pretty firewood!)
« Reply #45 on: June 08, 2011, 03:10:36 am »
That sucks.....sorry to see that, but you are taking it well and learning from it so the loss is not too bad.
In my opinion, you can make a bendy handle bow out of any wood that will make a bow at all, you just have to make sure you don't try to get it to bend too much there. Especially if you narrow the handle at all. On to round three eh :)
Darcy
Darcy Ellis
Fort Fraser BC Canada eh!

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: Maple Board Trade Bow (Was Finished... Now it's pretty firewood!)
« Reply #46 on: June 08, 2011, 04:13:11 am »
That's a tough break  :-[
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Maple Board Trade Bow (Was Finished... Now it's pretty firewood!)
« Reply #47 on: June 08, 2011, 04:20:17 am »
They just keep getting better that one was cool but third times a charm l am on the edge of
my seat can't wait to see the pics :o.of the lucky bow that gets to wear that wrap  :o
Is this bow making a sickness? or the cure...

Offline johnston

  • Member
  • Posts: 976
Re: Maple Board Trade Bow (Was Finished... Now it's pretty firewood!)
« Reply #48 on: June 08, 2011, 06:32:48 am »
As long as only the bow broke and not your attitude you will be fine ;).

It WAS pretty though :-\.

Lane