Author Topic: hickory stave curing  (Read 1351 times)

0 Members and 1 Guest are viewing this topic.

Offline luke the drifter

  • Member
  • Posts: 171
hickory stave curing
« on: June 04, 2011, 04:52:18 pm »
if i cut one down, rough it out to stave status, seal the back and ends, how long to cure before i can start roughing it out to bow dimensions?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,618
Re: hickory stave curing
« Reply #1 on: June 04, 2011, 05:45:25 pm »
You can rough the stave out to floor tiller stage without adversely affecting the ultimate bow.  I've heard you don't have to seal the back on hickory and maybe other whitewoods. I do anyway but use shellac because it is very easy to remove later.
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline luke the drifter

  • Member
  • Posts: 171
Re: hickory stave curing
« Reply #2 on: June 04, 2011, 08:09:57 pm »
i thank you for your information Pat B.