« previous next »
Pages: [1]

Author Topic: Fish swim bladder glue?  (Read 5224 times)

0 Members and 1 Guest are viewing this topic.

Offline BowJunkie

  • Member
  • Posts: 283
Fish swim bladder glue?
« on: May 21, 2011, 12:51:31 pm »
I was watching a video on youtube, and ran across a video on how you can boil swim bladders from fish and make glue.
Have any of you guys tried this method? If so what were the results.
The reason i ask, is because I do a lot of fishing and and usually throw the swim bladders out after processing the fish.
Logged
Johnny
in Texas

Offline fusizoli

  • Member
  • Posts: 238
Re: Fish swim bladder glue?
« Reply #1 on: May 21, 2011, 01:53:21 pm »
All sweet water fish bladder is ok. Have to remove all fat U find on it. Not boil it directly just in water bath. It will gives the best glue!

Bladders should dry it out, or freeze down.

http://www.atarn.org/FAQ/fish_bladder_glue.htm  This is from sturgeon.

I ve boiled it for 3-4 hours and it working fine too. Used carp bladder. It working like a natural superglue. Just push two wooden parts together and few seconds later couldn't separate the parts just brake it.
« Last Edit: May 21, 2011, 02:02:34 pm by fusizoli »
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: Fish swim bladder glue?
« Reply #2 on: May 21, 2011, 02:24:43 pm »
James Parker(Robustus) uses bladder glue(and other natural protein glues) on his horn bows I believe. I've never used it but have heard it is very strong and possibly more water proof than other hide glues.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline fusizoli

  • Member
  • Posts: 238
Re: Fish swim bladder glue?
« Reply #3 on: May 21, 2011, 02:47:03 pm »
It takes the water from humid air slower than other glues.
Logged
Pages: [1]
« previous next »