Haven't received mine yet but also haven't sent mine out yet. Mine should be ready to go out next week sometime. I'll post some pictures on here just before shipping. It's turning out nice so far, actually used a maple board with some of the straightest grain I've found in a maple board. Backed with rawhide and did a paddle bow design, 2.5" tapering down to .5" at the tips. Bow is a little heavy right now though, the person it's for requested 45# or higher, but right now it's pulling around 65# so I'd like to get that down to at least 55#. I know alot of people say rawhide doesn't add draw weight to a bow but this thing was pulling 55#'s before I put the rawhide on. I did have a little issue with the tips so I cut those down about 1" on each side, which should have added about 5#'s and I think the other 5#'s were a result of the rawhide.