« previous next »
Pages: 1 [2]

Author Topic: hunting bow  (Read 5937 times)

0 Members and 1 Guest are viewing this topic.

Offline hillbilly61

  • Member
  • Posts: 893
  • Fly straight and true
Re: hunting bow
« Reply #15 on: May 18, 2011, 01:55:32 pm »
  The molly failed  :'( I have no idea why. ??? It was Hick backed Red Oak. I've had no luck with RO and going to quit useing it.....For now
Logged
I will say of the Lord,"He is my refuge and my fortress;
  My God, in Him I will trust."  Psalm 91:2

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: hunting bow
« Reply #16 on: May 18, 2011, 06:24:29 pm »
thanks Pappy
thanks Scott i was happy with this one
sorry to hear that Mark , red oak is not my fav. either although it will make a servicesable bow
Logged

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: hunting bow
« Reply #17 on: May 18, 2011, 07:40:43 pm »
Nice bow Ken!
Logged
Frank from Germany...

Offline tattoo dave

  • Member
  • Posts: 1,545
  • Rockford, MI
Re: hunting bow
« Reply #18 on: May 18, 2011, 08:14:31 pm »
Another awesome bow Ken!!! I just got some snake skins in the mail today from Mike (almostpighunter), Diamond backs, I would love to put them on a molly. Don't feel bad about that red oak Mark. I've had good luck with RO, but can't seem to make a working molly.

Tattoo Dave
Logged
Rockford, MI

Offline scp

  • Member
  • Posts: 660
Re: hunting bow
« Reply #19 on: May 18, 2011, 11:04:44 pm »
Not quite a 50/50 Molly, but IMHO 28" draw length from two 15" working limbs is a remarkable achievement for a self bow over 50#. Especially when the unstrung tips are not much more than 1" below the "handle back line." It would be nice to have several measurements of the working limbs' thickness.
Logged

Offline cuthalion

  • Member
  • Posts: 15
Re: hunting bow
« Reply #20 on: May 19, 2011, 12:52:55 am »
Great bow...tiller looks sweet and the snake skin is awsome
Logged

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: hunting bow
« Reply #21 on: May 19, 2011, 01:07:49 am »
thank you Frank
thanks Dave
scp , i did a experiment a while back on lever length and performance and what i determined was the effeciency was better slightly under the 50 50 ratio. i try now to get about 2 to 3 inch shorter levers than working limb. also the thickness is almost the same through the working limb due to the tapering of the sides. i know this isnt original to the molly design but one  of the biggest probs i see with molly tiller is too much bend at the handle fades , this helps in that respect.
thanks cuthalion
Logged

Offline madmax46

  • Member
  • Posts: 26
Re: hunting bow
« Reply #22 on: May 20, 2011, 08:36:05 am »
Nice bow, Ken.  And the laced wrap is cool!    ;)
Logged
"Work like you don't need the money, dance like no one is watching, and love like you've never been hurt."    ...Mark Twain

Offline ken75

  • Member
  • Posts: 1,886
  • crepe myrtle is my "yella wood"
Re: hunting bow
« Reply #23 on: May 21, 2011, 11:32:12 pm »
thanks max , i enjoyed this one
Logged
Pages: 1 [2]
« previous next »