« previous next »
Pages: [1]

Author Topic: How long to cut handle pieces?  (Read 1691 times)

0 Members and 1 Guest are viewing this topic.

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
How long to cut handle pieces?
« on: May 07, 2011, 02:21:56 pm »
I was just given a lot of pecan, oak, hickory, ash and poplar board lumber from a cabinet maker. Too short for bows, bit how long should I cut them for handle pieces?
Logged
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.

Offline sailordad

  • Member
  • Posts: 5,045
Re: How long to cut handle pieces?
« Reply #1 on: May 07, 2011, 02:26:01 pm »
my hanldes ae generaly 4"
so with fades i would think 6"-8" should be plentiful
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline skyarrow

  • Member
  • Posts: 1,703
  • Sterling Lynch Victoria, TX (361)935-1715 text me
Re: How long to cut handle pieces?
« Reply #2 on: May 07, 2011, 02:37:46 pm »
Any length will do it just depends on what you want and If you have small or big hands
« Last Edit: May 07, 2011, 09:27:31 pm by skyarrow »
Logged
"We don't have mistakes here, we just have happy accidents" Bob Ross RIP 1995

Offline bubby

  • Member
  • Posts: 11,054
Re: How long to cut handle pieces?
« Reply #3 on: May 07, 2011, 07:04:15 pm »
like sailordad i go with a 4" handle and 1 1/2"-2" fades but cut the blanks eight to ten inches long, gives me more room to layout and ya can use the fade cuts for tip overlays, Bub
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline 4est Trekker

  • Member
  • Posts: 311
Re: How long to cut handle pieces?
« Reply #4 on: May 07, 2011, 07:27:58 pm »
Why cut them?  I'd just leave them as is as cut as you go.  There will be way less waste that way, and you don't squirrel yourself into a corner by designating the lumber for one purpose. 
Logged
"Walk softly, and carry a bent stick."

"And whatever you do, whether in word or deed, do it all in the name of the Lord Jesus Christ, giving thanks to God the Father through him."  Col. 3:17

Offline criveraville

  • Member
  • Posts: 3,210
  • Psalm 127:4
Re: How long to cut handle pieces?
« Reply #5 on: May 07, 2011, 08:27:23 pm »
Thanks folks... I'm gonna keep the long ones as is and cut a few to add to my wooden blocks center until I need em ;D

or maybe I will make short bows like Ken75 and splice the short pieces and make mo short bows
Logged
I was HECHO EN MEXICO, but assembled in Texas and I'm Texican as the day is long...  Psalm 127:4 As arrows are in the hand of a mighty man; so are children of the youth.
Pages: [1]
« previous next »