« previous next »
Pages: [1]

Author Topic: Handle splicing jig.  (Read 8458 times)

0 Members and 2 Guests are viewing this topic.

Offline Markus

  • Member
  • Posts: 183
Handle splicing jig.
« on: April 05, 2011, 03:48:52 pm »
I don`t know if all of you are familiar with this splicing jig. It appeared in PA volume 7 issue 4. It was by Mr. Tom Rogers and I hope he does not mind that I post pics of the jig I made after his drawings. I works very well.  Markus.








Logged

Offline Lee Slikkers

  • Member
  • Posts: 1,545
Re: Handle splicing jig.
« Reply #1 on: April 05, 2011, 10:52:10 pm »
That's a pretty slick setup/jig!  Do you have any dimensions or pattern for it that can be shared?
Logged
~ Lee

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"The last word in ignorance is the man who says of an animal or plant: 'What good is it?"
— Aldo Leopold
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Offline Markus

  • Member
  • Posts: 183
Re: Handle splicing jig.
« Reply #2 on: April 06, 2011, 08:45:29 pm »
Lee, PM sent.  Markus.
Logged

Offline gstoneberg

  • Member
  • Posts: 3,889
Re: Handle splicing jig.
« Reply #3 on: April 07, 2011, 01:48:07 am »
I made one like that after seeing it in either PA or TB back a few years ago.  It never worked for me.  I get better results using a template and making the cuts by hand.  Yours sure seems to work.  Very nice.

George
Logged
St Paul, TX

Offline billy bowmaker

  • Member
  • Posts: 54
Re: Handle splicing jig.
« Reply #4 on: April 08, 2011, 04:15:16 am »
awesome jig!   Will you please send me the dimensions as well?

thank you very much
Logged

Offline Hunter Van Winkle

  • Member
  • Posts: 58
Re: Handle splicing jig.
« Reply #5 on: September 09, 2012, 09:50:14 pm »
Cool setup! I have trouble with drift on my bandsaw but I think if I fed the wood very slowly it would work well.
Logged

Offline Tom Leemans

  • Member
  • Posts: 524
Re: Handle splicing jig.
« Reply #6 on: September 26, 2012, 11:41:16 am »
I made one. Dean shows how to make/use one in "Hunting The Bamboo Backed Bow".
Logged

Offline gordread

  • Member
  • Posts: 9
Re: Handle splicing jig.
« Reply #7 on: September 28, 2012, 12:50:43 pm »
That's  pretty slick idea.  Thanks for the pics.

Gordon
Logged
Pages: [1]
« previous next »