Author Topic: Still working on my osage recurve and I have a question please...  (Read 1152 times)

0 Members and 1 Guest are viewing this topic.

Offline Kountry83

  • Member
  • Posts: 34
Hey ya'll

As ya'll know Im still working on my first recurve and im stuck.
The length of the bow is 56 inches ntn, what im stuck at is Im confused on where to start my reflex at and the dept of the relex...any suggestions?
The bow width starts from the grip at 1.5 inches faded to 1 inch at mid limb to the tip at .5 inch, thickness all the way down is about an .5 inch.

So if ya'll have any ideas I would appreciate it, thanks again for the support and I will post pictures soon.

Kountry

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Still working on my osage recurve and I have a question please...
« Reply #1 on: April 03, 2011, 04:33:42 pm »
Will you post pics so we can see the back profile and the side profile?
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline artcher1

  • Member
  • Posts: 1,114
Re: Still working on my osage recurve and I have a question please...
« Reply #2 on: April 03, 2011, 04:44:27 pm »
What's your draw length going to be on your bow Kounty?   

Offline Kountry83

  • Member
  • Posts: 34
Re: Still working on my osage recurve and I have a question please...
« Reply #3 on: April 03, 2011, 05:59:50 pm »
I will take pictures and try to upload them, and the draw im looking for is 26-28 at anywhere of 60# to 70#...
thank you for ya'lls responses