As some of you guys already know I cut some Devils Walking stick last weekend. The tree( It's actually a shrub) was about 9 inches in diameter. I cut the tree and got a nice 6 foot "log" from it. I split the "log" into 3 staves. I removed the bark and then sealed the ends and the back. After the sealant had dried I placed the staves in a heat box set at about 85 degrees.
They have been in there a week. My buddy told me they are down to about 20% moisture content. Tomorrow we are going to start roughing out a couple bows from the staves..
I'm shooting for 45#@ 26. The dimensions will be 2.25 wide tapering to 1/2 tips. 68 tip to tip.
I'm not sure if this wood will even make a bow, and as far as I know it has never even been attempted( there is probably a good reason for that) , but none the less I'm gonna TRY!!!
I will keep you guys posted as the project advances and add pics when I can.