« previous next »
Pages: 1 [2]

Author Topic: Hand Planned Half Dozen  (Read 9644 times)

0 Members and 1 Guest are viewing this topic.

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Hand Planned Half Dozen
« Reply #15 on: February 12, 2011, 06:00:10 pm »
Quote from: aznboi3644 on February 12, 2011, 04:24:00 pm
If I had me a table saw I'd rip me up some blanks.  Got quite a few straightest grain can be red oak boards.  Gotta find me a friend with one :) lol

In TBBI Jay Massy just split his wood then planned it square. If your wood is really straight, shouldnt be too much waste.

Quote from: George Tsoukalas on February 12, 2011, 02:21:12 pm
There's nothing like making your own shafts. I actually find it very relaxing.  Jawge
.

I agree. I purchased a 'shaft shooter' several years ago but I find I miss the relaxation of doing shafts by hand.
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline briarjumper12

  • Member
  • Posts: 149
Re: Hand Planned Half Dozen
« Reply #16 on: February 18, 2011, 11:27:07 pm »
I planed out a dozen hard maple shafts.  Gave them to my Dad when I gave him my latest bow.  Very good experience...builds patience and character.
Then I tried my hand at router setup.  Diseaster.
Now I have me a shaft shooter and I like it.  Got 30 or 40 shafts I'm working on now with more stock in the drying box.  Trying some hard maple and hickory heartwood this time.
John
Logged

Offline swamp monkey

  • Member
  • Posts: 784
Re: Hand Planned Half Dozen
« Reply #17 on: March 06, 2011, 12:22:46 pm »
I have dial up so I read the comments while the pix loaded.  When I scrolled up I was struck with awe and said, "oh, those are beautiful."   Nice work pard.
Logged

Offline Canoe

  • Member
  • Posts: 238
  • Progress - Not Perfection
Re: Hand Planned Half Dozen
« Reply #18 on: March 21, 2011, 10:00:22 pm »
Howdy Lombard,

Those are some very nice arrows.  I hope they fly well, and I'm sure they do.

Hey, I really like your fletching jig.  (And, I like the cost of one like that.)

Question;  When using a jig like that (leather with three slits cut in), when / how do you apply the glue? 
Do you tie down the fletchings, front and back, and then apply the glue to the edges of the fletching?  I just don't see how you are getting them glued down??

Thanks for sharing,
Canoe
Logged
"Nature is a mutable cloud which is always and never the same."  - R. W. Emerson

"Wilderness is not a luxury, but a necessity of the human spirit."    -Edward Abbey

Online Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Hand Planned Half Dozen
« Reply #19 on: March 25, 2011, 09:58:53 am »
Great looking bunch of arrows,that reminds me I need to get on some arrows. ;) ;D ;D
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Hand Planned Half Dozen
« Reply #20 on: March 27, 2011, 11:08:40 am »
I tried  using a router but it required constant vigilance allowing for almost no relaxation.  I guess I learned from Dad. He wouldn't use and electric screw driver. LOL. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline wakosama

  • Member
  • Posts: 60
Re: Hand Planned Half Dozen
« Reply #21 on: March 29, 2011, 09:51:05 pm »
Very nice, really, but how do you get them all the same spline? I have some straight doug fir and have never tried because I didn't know how to get consistent.
Logged
Think as if your LIFE depends on it... IT DOES...!

Offline seabass

  • Member
  • Posts: 2,267
Re: Hand Planned Half Dozen
« Reply #22 on: April 05, 2011, 12:25:41 am »
nice job on the shafts.looks like i need to invest in a table saw,steve
Logged
Middletown,Ohio
Pages: 1 [2]
« previous next »