« previous next »
Pages: [1]

Author Topic: Crack!  (Read 2211 times)

0 Members and 1 Guest are viewing this topic.

Offline Caius

  • Member
  • Posts: 47
Crack!
« on: March 29, 2011, 12:42:43 am »
Depressing... First bow, get a long string on it, pull it taught, then when i go to check the weight, snap.

The crack is thin, on the back and one side. Halfway up a limb. Can I save it? With a backing or something?

Its an 80" piece of maple grain is straight and everything.
Logged
"Wyrd bið ful aræd"
Edmonton, AB

Offline JW_Halverson

  • Member
  • Posts: 11,923
Re: Crack!
« Reply #1 on: March 29, 2011, 12:46:21 am »
Crack kills.

Post a pic, we'll give our best advice, but things don't sound so good.

Good luck.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline juniper junkie

  • Member
  • Posts: 714
Re: Crack!
« Reply #2 on: March 29, 2011, 01:27:43 am »
is the crack horizontal or vertical?
Logged

Offline sailordad

  • Member
  • Posts: 5,045
Re: Crack!
« Reply #3 on: March 29, 2011, 01:36:57 am »
if its 80" long
depending on where it is
you might be able to cut it off and still have a good bow length piece of wood
Logged
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Crack!
« Reply #4 on: March 29, 2011, 01:49:10 am »
  A crack across the back is bad! How far did you pull it when it cracked?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Caius

  • Member
  • Posts: 47
Re: Crack!
« Reply #5 on: March 29, 2011, 06:05:25 am »
About 45* to the horizontal on the back and a little more vertical on the side.
I probably will try to cut it off...
And 11"
Logged
"Wyrd bið ful aræd"
Edmonton, AB

Offline aznboi3644

  • Member
  • Posts: 802
Re: Crack!
« Reply #6 on: March 29, 2011, 01:03:48 pm »
80" seems pretty long to break on the long string tillering.  Where you hinging it pretty bad?
Logged

Offline Caius

  • Member
  • Posts: 47
Re: Crack!
« Reply #7 on: March 29, 2011, 01:40:50 pm »
Thats what I thought azznboi, I looked closely this morning and I saw that I had effed up when I was planing the side and must have created a fracture... I digress, about 55" is useable, is that too short for a 33" draw?
Logged
"Wyrd bið ful aræd"
Edmonton, AB

Offline spinney

  • Member
  • Posts: 22
Re: Crack!
« Reply #8 on: March 29, 2011, 01:53:29 pm »
Quote from: Caius on March 29, 2011, 01:40:50 pm
about 55" is useable, is that too short for a 33" draw?

Much too short!

Spinney.
Logged

Offline Caius

  • Member
  • Posts: 47
Re: Crack!
« Reply #9 on: March 29, 2011, 01:54:44 pm »
Whats the max draw I can get on it?
Logged
"Wyrd bið ful aræd"
Edmonton, AB

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Crack!
« Reply #10 on: March 29, 2011, 03:12:57 pm »
14 inches max. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline NTD

  • Member
  • Posts: 1,771
Re: Crack!
« Reply #11 on: March 29, 2011, 03:53:41 pm »
If the maple is a good piece, good grain, decent density , and you tiller it well,  I don't see any reason you couldn't get 24-25" draw from a 55" bow.  Especially if you do a bend through the handle.

14" Jawge???  Was that a typo?  Even if you did a non bending handle with 8" of non working wood that leaves you 23.5" limbs take 10% away from that and you still have an almost 22" draw even going by that conservative standard that seems to float around.  Go with a bend through the handle bow and 24-25" should be easy....

Logged
Nate Danforth

Offline Caius

  • Member
  • Posts: 47
Re: Crack!
« Reply #12 on: March 29, 2011, 04:01:06 pm »
Okay thanks guys, I just cut off the broken limb and its depressingly short :(
Logged
"Wyrd bið ful aræd"
Edmonton, AB
Pages: [1]
« previous next »