« previous next »
Pages: 1 ... 5 6 [7] 8 9 10

Author Topic: white ash build along (finally done( this time for real))  (Read 63915 times)

0 Members and 4 Guests are viewing this topic.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along
« Reply #90 on: April 21, 2011, 01:01:51 am »
ok, good to know, now to find my nock cutting file, i swear i saw it a few days ago ???
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along
« Reply #91 on: April 28, 2011, 10:29:43 pm »
ok, bought a new file, shaped the nocks and i just put on the glue ;D
ill hopefully have pics of  it braced tomorrow when it is dried
thanks for looking
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along
« Reply #92 on: April 29, 2011, 12:47:21 am »
 >:( by now the tips had enough time for the epoxie i used to set so i went to check how they looked >:( >:( >:( >:( >:( one of them looked like it wasn't on all the way, so i looked and sure enough, for some reason is scooted down around an eighth of an inch, luckily it wasn't completely dry so i could pull it off but this means i have to clean the tip, get out the epoxy and re epoxy it. i was really looking forward to bracing it tomorrow but it looks like that may not happen
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along
« Reply #93 on: May 01, 2011, 01:19:12 am »
ok, sorry for the delay, but hear in order is the top nock, bottom and most of the bow in comparison to an 8ft fishing rod i jsut recently completed( pats self on back ::))
i stilll havent strung it yet becasue i am a little nervous stringing for a first time ;) but once i do ill show
by the way would a maple backed oak combo work for a d belly warbow of around 80lbs, my brother wants to get back into archery and im going to build him one
thanks for looking
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Ian.

  • Member
  • Posts: 470
Re: white ash build along
« Reply #94 on: May 01, 2011, 01:42:54 pm »
That's looking good, after all this we do need some full draw pictures, what is the weight?
Logged
ALways happy to help anyone get into heavy weight archery: https://www.facebook.com/bostonwarbowsbows/

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along
« Reply #95 on: May 01, 2011, 02:46:54 pm »
Quote from: Ian. on May 01, 2011, 01:42:54 pm
That's looking good, after all this we do need some full draw pictures, what is the weight?
right now i think two high ;), im having a hard time stringing so i will take some weight off it today so i can hopefully give you the weight and full draw
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline adb

  • Member
  • Posts: 5,339
Re: white ash build along
« Reply #96 on: May 01, 2011, 02:57:38 pm »
Are you using FF string?
Logged

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along
« Reply #97 on: May 01, 2011, 04:26:59 pm »
Quote from: adb on May 01, 2011, 02:57:38 pm
Are you using FF string?
i wish, right now its just a string made of nylon thread i have, it usually works well but i think once i get a little money ill get some D97, looks pretty good and allot cheaper than ff, just wish basspro sold it, i have 75 in gift cards
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline RyanY

  • Member
  • Posts: 1,999
Re: white ash build along
« Reply #98 on: May 01, 2011, 04:53:10 pm »
Nylon stretches way too much to be used as a bow string. Especially on a warbow. I use B-50 for my bows and used it for the last warbow I built and it stretched a lot before it settled in. I'd suggest trying to get a better material than nylon. A spool of B-50 shouldn't run you more than 10 bucks and just go with a few more strands.
Logged

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along
« Reply #99 on: May 01, 2011, 04:57:58 pm »
ya, im realizing the amount of stretch with this bow, which would be better, D97 or B50
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Ian.

  • Member
  • Posts: 470
Re: white ash build along
« Reply #100 on: May 01, 2011, 07:09:00 pm »
B50 isn't a warbow string, you need FF depends on the weight as to how many strands 18/20 normally
a 2nd option would be d75 but I don't know how much that costs.
Logged
ALways happy to help anyone get into heavy weight archery: https://www.facebook.com/bostonwarbowsbows/

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along
« Reply #101 on: May 01, 2011, 08:06:31 pm »
i might just have to say goodbye to my money and get some ff :'(, it will be worth it, i hope :-\
as you can tell im very cheep
thanks
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: white ash build along
« Reply #102 on: May 02, 2011, 01:27:38 am »
Quote from: fishfinder401 on May 01, 2011, 02:46:54 pm
Quote from: Ian. on May 01, 2011, 01:42:54 pm
That's looking good, after all this we do need some full draw pictures, what is the weight?
right now i think two high ;), im having a hard time stringing so i will take some weight off it today so i can hopefully give you the weight and full draw
thanks
noel

Noel have you tillered the bow to full draw? The reason I ask is because you said once you get some weight off you will get it stringed and give the full draw? How are you trying to string the bow?. Did I miss tillering after you got the bow on a short string? Or are you still trying to get it on the short string for tillering? Sorry I was just confused I thought maybe I missed something or part of the build ???

Josh
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: white ash build along
« Reply #103 on: May 02, 2011, 06:00:49 pm »
don't worry you didn't miss something, when i said i was going to do those things i didn't mean all at once, i am going to take some weight off, tiller on a short string then hopefully get the full draw pics. the way i am stringing is by the double nocks i carved into the horn
sorry for the confusion
noel
Logged
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Elktracker

  • Member
  • Posts: 1,964
  • Josh
Re: white ash build along
« Reply #104 on: May 02, 2011, 06:07:45 pm »
Ill say it again im not worried sorry I keep coming across to you that way, I was just curious thanks
Logged
my friends think my shops a mess, my wife thinks I have too much bow wood, my neighbors think im redneck white trash and they may all be right on the money!!

Josh Vance  Netarts OR. (Tillamook)
Pages: 1 ... 5 6 [7] 8 9 10
« previous next »