Author Topic: Where would be the best place to make a flint run?  (Read 3244 times)

0 Members and 1 Guest are viewing this topic.

Offline Ncsnipe

  • Member
  • Posts: 178
Where would be the best place to make a flint run?
« on: April 17, 2011, 01:32:42 am »
If you could take a week off to make a flint run, where would you go? What type of flint would you look for? Just interested in your thoughts.

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: Where would be the best place to make a flint run?
« Reply #1 on: April 17, 2011, 02:04:51 am »
I would depend on if you wanted to be adventurous or go where it's known. The only place I know of that I can find it, is Flint Ridge Ohio. I would also read as many past posts on the subject and hopefully get some tips.
On the adventure side, Georgia, West Virginia, Tennessee and Kentucky all hold some good rock if you can find it. NC has some good rock as you know, but that has seemed to be an "adventurous option" also, at least to me.
There are no bad knappers, only bad flakes

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: Where would be the best place to make a flint run?
« Reply #2 on: April 17, 2011, 07:48:18 pm »
jesse's garage!!!!!  ;D ;D ;D ;D ;D
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: Where would be the best place to make a flint run?
« Reply #3 on: April 17, 2011, 09:05:42 pm »
Haha..
 I'd call Mr Parker at Magnet Cove in Arkansas and set up a trip to head out there and load up on novaculite.
But your have to cook it and it need to go up to atleast 650* and 700* is best.
 Flint ridge is a good bet also, but thats very hard work if done by hand.
 Looking for ft payn in middle TN is also a good bet.
« Last Edit: April 18, 2011, 12:54:41 am by leapingbare »
Mililani Hawaii

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Where would be the best place to make a flint run?
« Reply #4 on: April 18, 2011, 12:34:43 am »
Rootbeer chert is my favorite, so I would go wherever I could get a great big batch of it.  Maybe around Kerville, TX?  I've worked some colorful agates and love the stuff, so that would be my second choice.  I like the raw stuff the best, in any case.


Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline sailordad

  • Member
  • Posts: 5,045
Re: Where would be the best place to make a flint run?
« Reply #5 on: April 18, 2011, 02:01:32 am »
Haha..
 I'd call Mr Parker at Magnet Cove in Arkansas and set up a trip to head out there and load up on novaculite.
But your have to cook it and it need to go up to atleast 650* and 700* is best.
 Flint ridge is a good bet also, but thats very hard work if done by hand.
 Looking for ft payn in middle TN is also a good bet.


a guy i know here in minnesota,that knapps,asked me if i wanted to do that very thing the summer of 2012
he wants to go there and to the keokuk quarry
so i am already saving up my share of the gas and rock money
hes got a kiln and offered to heat it all,works for me  ;D ;)
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: Where would be the best place to make a flint run?
« Reply #6 on: April 18, 2011, 09:16:08 am »
you still have to buy the rock at the qurry. Its only 45 cents a pound but it adds up when you get over 1000 pounds,
Mililani Hawaii

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Where would be the best place to make a flint run?
« Reply #7 on: April 18, 2011, 05:31:06 pm »
Most anywhere in the TX hill country is good but i'd like to hit that flint ridge quarry sometime.
When you come upon a track or trail you do not know, follow it to the point of knowing.

JustinNC

  • Guest
Re: Where would be the best place to make a flint run?
« Reply #8 on: April 18, 2011, 09:52:36 pm »
I've been planning a trip to cowboy and tower's back yard.
 Ooops I wasn't supposed to mention that out loud.
Speaking of cowboy, when are you Concord bound?

Offline sailordad

  • Member
  • Posts: 5,045
Re: Where would be the best place to make a flint run?
« Reply #9 on: April 18, 2011, 09:56:16 pm »
you still have to buy the rock at the qurry. Its only 45 cents a pound but it adds up when you get over 1000 pounds,

ya i figure i need about $1500 for my share of gas and rock and things
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline leapingbare

  • Member
  • Posts: 2,028
    • http://www.flintknappers.com/jessewright/
Re: Where would be the best place to make a flint run?
« Reply #10 on: April 21, 2011, 10:05:01 pm »
Maybe not that much. i'd think 800 would pay for all the rock youd have room for and cover food and gas.
Mililani Hawaii

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Where would be the best place to make a flint run?
« Reply #11 on: April 22, 2011, 12:37:54 am »
Justin: Don't know that i'm coming to Concord now. Schedules change, but you can come to my back yard anytime :).
When you come upon a track or trail you do not know, follow it to the point of knowing.