had these deer legs for some time. kept meaning to make some points with em. finally got a round tuit
saw somewhere on a tutorial this fella just busted the leg bone with a hammer....and used what pieces were suitable.
i took the bone to the bandsaw, sliced in half. marked it out with a pencil, then stuck in vise and took files to it till it was as i wanted. then sanded with some 220 grit to sorta polish it up, soaked it for a few hrs in that walnut ink i made a few weeks ago. then attached to shaft with pine pitch and artificial sinew. used some tbIII to coat sinew.
![](http://i878.photobucket.com/albums/ab346/sadiejane9/bow%20and%20arrow%20making/bone44.jpg)
![](http://i878.photobucket.com/albums/ab346/sadiejane9/bow%20and%20arrow%20making/bone11.jpg)
![](http://i878.photobucket.com/albums/ab346/sadiejane9/bow%20and%20arrow%20making/bone22.jpg)
![](http://i878.photobucket.com/albums/ab346/sadiejane9/bow%20and%20arrow%20making/bone33.jpg)