Author Topic: what would you do for a hunting notch  (Read 4775 times)

0 Members and 1 Guest are viewing this topic.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: what would you do for a hunting notch
« Reply #15 on: March 15, 2011, 04:15:59 pm »
 8)
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: what would you do for a hunting notch
« Reply #16 on: March 15, 2011, 04:33:48 pm »
Sailor that sounds like the ticket.  I knocked them off 4 times.  On youtube they make it look easy. I guess I have to keep trying I can't expect to get it right first time.  I just need to find the right hold and pop the flake off without knocking the ears ans tabs off in the process.  I think I will do as you said and come more from below.  If anyone else has ideas it would be great to hear them. Thank you.
(:::.) The ABO path is a new frontier to the past!

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: what would you do for a hunting notch
« Reply #17 on: March 15, 2011, 05:09:34 pm »
   I liike useing side nocks on my hunting heads.
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: what would you do for a hunting notch
« Reply #18 on: March 15, 2011, 05:11:36 pm »
Looks like a dang fine point to me.
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Offline Bill Skinner

  • Member
  • Posts: 384
Re: what would you do for a hunting notch
« Reply #19 on: March 15, 2011, 07:29:04 pm »
The only stone point that broke on contact with an animal that I have shot was stemmed.  The junction of shaft and stone is usually where the pont breaks, the various side or corner notches have more and wider stone there and are less likely to break.  I no longer use obsidion any more either.  Bill

Offline Tower

  • Member
  • Posts: 2,298
Re: what would you do for a hunting notch
« Reply #20 on: March 15, 2011, 09:24:00 pm »
Good lookin point.
He who sacrifices freedom for a security deserves neither one.  Benjamin Franklin!

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: what would you do for a hunting notch
« Reply #21 on: March 16, 2011, 02:45:36 am »
Thank you for all the encouragement and information very interesting.  Bill that was good to know info on points breaking.
(:::.) The ABO path is a new frontier to the past!

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: what would you do for a hunting notch
« Reply #22 on: March 16, 2011, 08:06:22 am »
i second what bill said. most of the stemmed points i used broke at the stem. many during practice shots into soft foam.
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: what would you do for a hunting notch
« Reply #23 on: March 16, 2011, 09:24:19 am »
When you say stemmed are you taking about points made like number 1
(:::.) The ABO path is a new frontier to the past!

Offline jamie

  • Member
  • Posts: 2,387
  • born again pagan ,dirt worshipping heathen
Re: what would you do for a hunting notch
« Reply #24 on: March 16, 2011, 10:06:54 am »
yes. and without the barbs too
"Man is a tool-using animal. Without tools he is nothing, with tools he is all."

waterbury, ct

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: what would you do for a hunting notch
« Reply #25 on: March 16, 2011, 11:22:03 am »
I could see how the tab and ears could act like a rudder.  They may help to stabilize the point as it passes through the animal. They extend past the point off effort so it could be a physics thing as well as a mass issue. 
(:::.) The ABO path is a new frontier to the past!

Offline maddog314

  • Member
  • Posts: 324
Re: what would you do for a hunting notch
« Reply #26 on: March 16, 2011, 12:09:25 pm »
I love the info! What kind of rock is the point? looks real good.
Micah

Offline Bill Skinner

  • Member
  • Posts: 384
Re: what would you do for a hunting notch
« Reply #27 on: March 17, 2011, 12:29:13 am »
I have never used a basal notch point so I don't know if it is better than a stemmed point.  I suspect that it will be about as strong, simply because where you attach the shaft,the stone stem is narrow. 

FWIW, probably 80% of the points I find are stemmed, so stemmed worked for a long time.  Bill 

Offline sailordad

  • Member
  • Posts: 5,045
Re: what would you do for a hunting notch
« Reply #28 on: March 17, 2011, 12:35:51 am »
bill, your right
stemmed points have been around for a long long time
and they are quit effeictive and sturdy
many many many many artifact stemmed points have been found on the continent
intact and still fully fucntional
i done see why anyone would think they would be inferior
if,when making a stemmed point,your cross section is right
it will be quit sturdy and stand up to hunting situations


i mentioned they would be my style of choice
i said it simply because that is one style that cant be misinterpeted as "barbed"
i always wanted a harley,untill it became the "thing to ride"
i ride because i love to,not to be part of the crowd

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: what would you do for a hunting notch
« Reply #29 on: March 17, 2011, 02:15:53 am »
This is high ridge burlington
I love the info! What kind of rock is the point? looks real good.
Micah
(:::.) The ABO path is a new frontier to the past!