Author Topic: Seasoning wood  (Read 2847 times)

0 Members and 1 Guest are viewing this topic.

Offline LEGIONNAIRE

  • Member
  • Posts: 632
Seasoning wood
« on: March 01, 2011, 11:05:51 pm »
Hey guys just a question regarding wood seasoning. This year I will be having ALOT of wood in my shed down in southern California. the thing is I have some osage orange staves, black locust and mulberry. As you know so cal is notorious for very hot weather 120 where I live and pretty dry. my question is if theres anything I can do to prevent over drying? I was thinking of leaving the black locusts in log form so they will conserve moisture. They will be away from the sun. Sometimes it gets pretty humid aswell.
thanks
CESAR

LEGIONNAIRE ARCHERY

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Seasoning wood
« Reply #1 on: March 01, 2011, 11:25:40 pm »
I think that instead of trusting the bark to keep it from checking, I would debark and seal the back really really good, and then some, just to make sure. And then I would take some (maybe the best ones) inside the house to make sure that some dry slow, and to try to keep the percentage of potential check casualties down, :). I don't know about black locust, but osage and mulberry both check freaking ridiculously.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline denny

  • Member
  • Posts: 304
    • my site
Re: Seasoning wood
« Reply #2 on: March 01, 2011, 11:38:08 pm »
Paint them with parrafin, cheap and works like bark. Denny

Offline LEGIONNAIRE

  • Member
  • Posts: 632
Re: Seasoning wood
« Reply #3 on: March 02, 2011, 03:00:04 pm »
Thanks :) sounds like ALOT of work, i have like 30+ saves, will probably have somehing like 60 when summer begins.. ill probably only do he osage just because its so difficult to come by.
CESAR

LEGIONNAIRE ARCHERY

Offline DEllis

  • Member
  • Posts: 397
Re: Seasoning wood
« Reply #4 on: March 02, 2011, 03:57:04 pm »
Just a thought, but if the moisture content is already quite low, could you just wrap them up in a tarp to keep the moisture in??
Darcy :)
Darcy Ellis
Fort Fraser BC Canada eh!

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Seasoning wood
« Reply #5 on: March 02, 2011, 04:25:24 pm »
I just lost some osage staves because I trusted the bark to protect the backs.  It lifted and they split everywhere.
I started out with nothin' and I still got most of it left

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Seasoning wood
« Reply #6 on: March 02, 2011, 04:59:20 pm »
"wrap them up in a tarp to keep the moisture in"

I tryed that once and ended up with some moldy staves. The staves were really fresh and back was still a little wet from pulling the bark off though, so that was probably the reason there. Most of the good ones were ok after catching it early (hackberry),  after taking em out in the fresh air, but I had to ditch a sycamore stave.
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Seasoning wood
« Reply #7 on: March 02, 2011, 05:04:29 pm »
Send them to England ;D.
Del
Health warning, these posts may contain traces of nut.

Offline DEllis

  • Member
  • Posts: 397
Re: Seasoning wood
« Reply #8 on: March 02, 2011, 05:16:40 pm »
"wrap them up in a tarp to keep the moisture in"

I tryed that once and ended up with some moldy staves. The staves were really fresh and back was still a little wet from pulling the bark off though, so that was probably the reason there. Most of the good ones were ok after catching it early (hackberry),  after taking em out in the fresh air, but I had to ditch a sycamore stave.
I expect that could be a problem that's why specified if they were already quite dry. Just to keep them at a safe MC.......not acually while drying them. Never tried it, but I don't see why it wouldn't work ??? maybe with some vent holes left open to let out a bit of moisture but not too much?
Darcy :)
Darcy Ellis
Fort Fraser BC Canada eh!