« previous next »
Pages: [1]

Author Topic: KOTB (knife on the brim)  (Read 2008 times)

0 Members and 2 Guests are viewing this topic.

Offline Mark Anderson

  • Member
  • Posts: 373
  • Mark Anderson Buckie, Scotland
KOTB (knife on the brim)
« on: February 22, 2011, 02:56:15 pm »
I didn't get into the KITH but Bevan R. and I got a trade going on the side.
Got this in the mail Friday.
Myrtle wood handle, Edger blade knife. The Sheath has these cool magnets to hold the blade in.
I am very impressed by this knife and he said it is only the third one he's made!
Enjoy
Mark

p.s. I didn't come up with the KOTB acronym, that was Bevan. I'm not that clever!
Logged
"Mommy some guys just don't know how to shoot REAL bows so they have to buy them, probably at Walmart and they have wheels on them."  Caedmon Anderson (4yrs)

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: KOTB (knife on the brim)
« Reply #1 on: February 22, 2011, 09:43:03 pm »
Thanks Bill, glade you liked it. Got you knife today and all I can say is WOW.

Thanks!!!

Bevan
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Mark Anderson

  • Member
  • Posts: 373
  • Mark Anderson Buckie, Scotland
Re: KOTB (knife on the brim)
« Reply #2 on: February 23, 2011, 04:13:22 pm »
Hope it serves you well. I've been drawing up this design for a while now. Wanted to make it a cross between a plain old hunter and an ulu-type skinner, so it's not quite either. It's made from a lawnmower blade someone gave me, the blade was never used so I wasn't worried about stress cracks or anything.
I think I might make another the same way for myself.
Mark
Logged
"Mommy some guys just don't know how to shoot REAL bows so they have to buy them, probably at Walmart and they have wheels on them."  Caedmon Anderson (4yrs)

Offline CherokeeKC

  • Member
  • Posts: 574
  • PM108323
Re: KOTB (knife on the brim)
« Reply #3 on: February 25, 2011, 12:59:26 pm »
Cool knives.  Did both of you use a forge while making these or just stock removal?
Logged
Aim Small...Hit Small

Offline Mark Anderson

  • Member
  • Posts: 373
  • Mark Anderson Buckie, Scotland
Re: KOTB (knife on the brim)
« Reply #4 on: February 25, 2011, 02:33:44 pm »
I just removed what I didn't want.
Mark
Logged
"Mommy some guys just don't know how to shoot REAL bows so they have to buy them, probably at Walmart and they have wheels on them."  Caedmon Anderson (4yrs)

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: KOTB (knife on the brim)
« Reply #5 on: February 25, 2011, 03:42:59 pm »
Cut mine out with a dremel then used my belt sander to shape and sharpen. Just want to keep the metal cool while shaping so to not lose the temper.

Bevan
Logged
Bowmakers are a little bent, but knappers are just plain flaky.
Pages: [1]
« previous next »