« previous next »
Pages: [1]

Author Topic: Sealer and sinew compatability.... which sealer over sinew backed bow?  (Read 2122 times)

0 Members and 1 Guest are viewing this topic.

Offline 1776J

  • Member
  • Posts: 339
Sealer and sinew compatability.... which sealer over sinew backed bow?
« on: February 21, 2011, 10:16:23 pm »
I had read a few of good things about using polyurethane on bows to weatherproof them for hunting.
My question is,....
Who's had good experiences with sealers/coatings over sinew?  I was going to stain the bow and seal it, but wanted to figure things out first.

If I did choose to go with polyurethane, is there any reaction to the hide glue that will occur? Will it be compatable or??....

Thanks fellas.
« Last Edit: February 21, 2011, 10:19:48 pm by 1776J »
Logged

Offline Timo

  • Member
  • Posts: 2,026
Re: Sealer and sinew compatability.... which sealer over sinew backed bow?
« Reply #1 on: February 21, 2011, 10:57:17 pm »
I've used epoxies, truoil, and polys over sinew with no ill effects.
Logged

Offline 1776J

  • Member
  • Posts: 339
Re: Sealer and sinew compatability.... which sealer over sinew backed bow?
« Reply #2 on: February 22, 2011, 12:04:40 am »
Quote from: Timo on February 21, 2011, 10:57:17 pm
I've used epoxies, truoil, and polys over sinew with no ill effects.

I couldn't imagine there being one,... but I wasn't sure if any sort of poly would badly interact with natural hide glue or anything!
THanks Tim...
Logged

Offline Timo

  • Member
  • Posts: 2,026
Re: Sealer and sinew compatability.... which sealer over sinew backed bow?
« Reply #3 on: February 22, 2011, 12:35:08 am »
Well since sinew/hide glue are made up of natural proteins and common finishes are not, then they shouldn't react? ;)
Logged
Pages: [1]
« previous next »