Author Topic: Another Red Oak board bow  (Read 6588 times)

0 Members and 3 Guests are viewing this topic.

Offline NTProf

  • Member
  • Posts: 250
Another Red Oak board bow
« on: February 19, 2011, 05:58:59 pm »
Can't get away from Red Oak. Here is my most recent. Home Depot special. 1 7/8 wide limbs to well past mid limb then tapering to 3/8" nockes. Handel wrapped in jute twine. 54lbs@28. 67" long. Takes just over 1" of set just after being unstrung, relaxes to 3/4" (I actually like some set in my bows). One of the best shooting bows I have made!

Offline NTProf

  • Member
  • Posts: 250
Re: Another Red Oak board bow
« Reply #1 on: February 19, 2011, 05:59:57 pm »
A couple more.

Offline NTProf

  • Member
  • Posts: 250
Re: Another Red Oak board bow
« Reply #2 on: February 19, 2011, 06:01:11 pm »
Sorry for repeat photo.

Offline jeffhalfrack

  • Member
  • Posts: 438
Re: Another Red Oak board bow
« Reply #3 on: February 19, 2011, 06:30:01 pm »
   Real  nice!  isn't it  crazy  how  simple it  could be,,, and  so  rewarding it  all  is???  JEFFW

Offline n2huntn

  • Member
  • Posts: 468
  • jeff_smith13@hotmail.com ROLL TIDE !
Re: Another Red Oak board bow
« Reply #4 on: February 19, 2011, 06:58:27 pm »
Looks good..
Jeff
Genesis 27: 3

Lombard

  • Guest
Re: Another Red Oak board bow
« Reply #5 on: February 19, 2011, 07:00:13 pm »
No need to get away from it NTProf, it makes fine bows. Although, it is nice to work with other species too. It looks like you made a fine weapon out of that Oak.

Offline NTProf

  • Member
  • Posts: 250
Re: Another Red Oak board bow
« Reply #6 on: February 19, 2011, 07:14:59 pm »
Thanks guys. Lombard, my last few bows have been from tropical woods, so it is nice to get back to Red Oak.

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: Another Red Oak board bow
« Reply #7 on: February 19, 2011, 07:38:57 pm »
Is your handle area left full thickness?  Doesn't look like there's any additional wood glued on there.

That's a fine looking bow.
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Offline half eye

  • Member
  • Posts: 3,300
Re: Another Red Oak board bow
« Reply #8 on: February 19, 2011, 08:14:53 pm »
NT,
     Way nice lookin bow.....Nothing wrong with a little set either, bet it is a strong shooter, and well mannered to boot.
rich

Offline Matt S.

  • Member
  • Posts: 380
Re: Another Red Oak board bow
« Reply #9 on: February 19, 2011, 08:17:11 pm »
How do you like the jute twine wrapped handle? Is it soft? Did you coat it with anything? Sorry for all the questions but I like the way it looks and I'm trying to branch out from my usual leather handles.

Offline ErictheViking

  • Member
  • Posts: 1,504
Re: Another Red Oak board bow
« Reply #10 on: February 19, 2011, 09:05:10 pm »
That is a fine looking bow NTP. I could go to Home D ten times and not find a board with that straight of grain or with that thick of rings. I like the braced pic( I always like braced pics). good job
"He that but looketh on a plate of ham and eggs to lust after it hath already committed breakfast with it in his heart"  C.S. Lewis

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Another Red Oak board bow
« Reply #11 on: February 19, 2011, 09:11:19 pm »
That's a really nice looking bow, NTProf. I like red oak too. Jawge
Set Happens!
If you ain't breakin' you ain't makin!

Offline NTProf

  • Member
  • Posts: 250
Re: Another Red Oak board bow
« Reply #12 on: February 19, 2011, 09:24:15 pm »
Thanks everyone. I coat the jute twine with very slightly diluted TBIII glue. The handle is just the thickness of the board. I narrowed it to about 1 3/8. I am not real big on glued-on handels.

Offline Ifrit617

  • Member
  • Posts: 1,596
Re: Another Red Oak board bow
« Reply #13 on: February 19, 2011, 09:44:23 pm »
Awesome board bow!!! I love board bows because they are so simple and fun to make but can make awesome and simple weapons like yours... Great bow.

Ifrit

Offline profsaffel

  • Member
  • Posts: 420
Re: Another Red Oak board bow
« Reply #14 on: February 19, 2011, 09:50:55 pm »
Well, that's a fine looking bow right there. I just started another Home Depot Red Oak board bow this weekend myself. Seemed like a good way to get back into bow making after a few months away. I hope mine turns out half as nice as yours.

-Prof
Professor of History, Student of Bowyery