Author Topic: mini experiment bow  (Read 1309 times)

0 Members and 1 Guest are viewing this topic.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
mini experiment bow
« on: February 17, 2011, 01:48:52 am »
in a pile of trees that were cleared in a farm next to my house i found a small cherry tree, but the only thing was, that the stright part at the bottom was only 40in, so i decided, why not and after some heat treating( it aparently wasn't fully dry) it is now 36in 2in of set and ( heres he suprising part) 50@14in!
now i think thats pretty good, its going to be my little bow i take with me while fishing, and dont worry ill post pics tommorow after school ???
thanks for listening
noel
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: mini experiment bow
« Reply #1 on: February 17, 2011, 10:48:38 am »
Sounds good, gotta see those pics.
Del
Health warning, these posts may contain traces of nut.

Offline fishfinder401

  • Member
  • Posts: 1,485
  • noel laflamme noellaf2@cox.net
Re: mini experiment bow
« Reply #2 on: February 18, 2011, 12:40:24 am »
the pics will be up tomorrow, i just tried backing a bow for the first time, i figured, a 36 bow, sounds easy enough, i backed it with hemp twine broken down into fibers
warbows and fishing, what else is there to do?
modern technology only takes you so far, remove electricity and then what