« previous next »
Pages: [1]

Author Topic: New workshop/ tillering tree video  (Read 2872 times)

0 Members and 1 Guest are viewing this topic.

Offline Jesse

  • Member
  • Posts: 2,129
New workshop/ tillering tree video
« on: February 12, 2011, 11:39:18 pm »
I've been building this shop for bow building all winter. Its really nice to have extra room to work. Its not done yet but its as done as its gonna be for a while :). Now I just need to work on some bows again. It was fun to build. Me and my Dad did it together so that was great. There was a few "firsts" for me on this project like installing the heater,gas lines,etc.  The framing,wiring,etc. was all stuff I had done before but not for a living so it took me some time :)  Still cant believe I get to work in here instead of the corner of my basement. I'm pretty happy to say the least.  Here is a video I made showing where I'm at so far. I really like the new tillering set up I came up with. Might have to patent this one :D  http://www.youtube.com/watch?v=F9oNTeOdPA0
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: New workshop/ tillering tree video
« Reply #1 on: February 12, 2011, 11:51:32 pm »
Very nice. :o

(By the way, I happen to like Heart  :D)
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline Jesse

  • Member
  • Posts: 2,129
Re: New workshop/ tillering tree video
« Reply #2 on: February 13, 2011, 12:12:57 am »
Quote from: Bevan R. on February 12, 2011, 11:51:32 pm
Very nice. :o

(By the way, I happen to like Heart  :D)
Thanks. Sorry about the heart thing :D
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,542
Re: New workshop/ tillering tree video
« Reply #3 on: February 13, 2011, 01:47:23 am »
Man, you need to get the new off that shop. Get some shavings and saw dust on the floor, tools all over the work bench, clamps wadded in a knot on the floor, you know, make it comfortable!  ;)
 Very nice shop Jesse. Nice bright space with a big window.  8)  Can't wait to see what comes out of that shop.  8)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Jesse

  • Member
  • Posts: 2,129
Re: New workshop/ tillering tree video
« Reply #4 on: February 13, 2011, 01:56:46 am »
Quote from: Pat B on February 13, 2011, 01:47:23 am
Man, you need to get the new off that shop. Get some shavings and saw dust on the floor, tools all over the work bench, clamps wadded in a knot on the floor, you know, make it comfortable!  ;)
 Very nice shop Jesse. Nice bright space with a big window.  8)  Can't wait to see what comes out of that shop.  8)
:D :DPat-- I am a slob so that shop would be a wreck in no time if it where not for the fact that I share it with my Dad so I have to keep it looking good :)  I dont think its possible to keep it at this level of "new" for long though ;D
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline osage outlaw

  • Member
  • Posts: 11,952
Re: New workshop/ tillering tree video
« Reply #5 on: February 13, 2011, 03:15:47 am »
Nice bow shop.  Just one question though.  You got a new shop and new tools, so whats up with the radio from 1987?  Just kiddin ;D
Logged
I started out with nothin' and I still got most of it left

Offline Jesse

  • Member
  • Posts: 2,129
Re: New workshop/ tillering tree video
« Reply #6 on: February 13, 2011, 03:27:10 am »
Quote from: osage outlaw on February 13, 2011, 03:15:47 am
Nice bow shop.  Just one question though.  You got a new shop and new tools, so whats up with the radio from 1987?  Just kiddin ;D
;D That thing only gets one station. I dont have to flip around. Just turn it on ;D
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline cracker

  • Member
  • Posts: 3,123
Re: New workshop/ tillering tree video
« Reply #7 on: February 13, 2011, 09:12:59 am »
Great looking shop Jesse. You might want to loosen the bolts holding the air compressor down to the floor come times the vibration will cause the legs to crack where they are welded into the tank especially if one leg is tweaked a tiny bit.Ron
Logged
If we can't help each other what is the point of being here?

Offline Dane

  • Member
  • Posts: 1,870
Re: New workshop/ tillering tree video
« Reply #8 on: February 13, 2011, 09:19:55 am »
Jesse, a beautiful shop. I am a bit envious here. My current workspace is half a 1 car garage. :) I think of it as intimate, like a bistro or a foxhole.

Satan and the other animals are very cool, too.

Thanks for sharing the video. Very inspiring.

Dane
Logged
Greenfield, Western Massachusetts

Offline Cameroo

  • Member
  • Posts: 1,579
    • Cam's Stuff
Re: New workshop/ tillering tree video
« Reply #9 on: February 13, 2011, 11:19:16 am »
Quote from: Dane on February 13, 2011, 09:19:55 am
Jesse, a beautiful shop. I am a bit envious here.

Ya, if envy is a sin, I think I need to go to confession... >:D
Logged

Offline Jesse

  • Member
  • Posts: 2,129
Re: New workshop/ tillering tree video
« Reply #10 on: February 13, 2011, 11:22:11 am »
Quote from: cracker on February 13, 2011, 09:12:59 am
Great looking shop Jesse. You might want to loosen the bolts holding the air compressor down to the floor come times the vibration will cause the legs to crack where they are welded into the tank especially if one leg is tweaked a tiny bit.Ron
Thanks guys. I am very blessed to have the new shop. Thanks for the advice Ron. I mounted it on thick rubber washers and it doesn't seem to vibrate. I would hate to have a leg break off. Hope its ok
Dane Thanks. The room I moved out of was pretty small. It doesn't take a nice shop to make nice stuff though. Oh by the way The name of that mouflon sheep is titan  ;D
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline Barrage

  • Member
  • Posts: 414
Re: New workshop/ tillering tree video
« Reply #11 on: February 13, 2011, 12:19:25 pm »
Very nice Jesse.  I do all my work in a 10x12 shed, that at any given time only has about 2x6 worth of room  ;D.  So I'm jealous too lol.

Nice sheep too.  Looks like your growing your own horn bow?!?  8)
Logged
Travis

Offline Dane

  • Member
  • Posts: 1,870
Re: New workshop/ tillering tree video
« Reply #12 on: February 13, 2011, 02:24:19 pm »
Titan? Oh man, I misheard you. Sorry!

Dane
Logged
Greenfield, Western Massachusetts

Offline Jesse

  • Member
  • Posts: 2,129
Re: New workshop/ tillering tree video
« Reply #13 on: February 13, 2011, 05:38:01 pm »
Quote from: Dane on February 13, 2011, 02:24:19 pm
Titan? Oh man, I misheard you. Sorry!

Dane
No sweat Dane. I wasn't sure if you were messing with me or not ;D
Logged
"If you can find a path with no obstacles, it probably doesn't lead anywhere."
    --Frank A. Clark

Offline John K

  • Member
  • Posts: 1,936
Re: New workshop/ tillering tree video
« Reply #14 on: February 13, 2011, 09:02:12 pm »
Awesome Jesse ! Congrats on a great place to build bows  :)
Logged
The only way to fail is to never start !
Pages: [1]
« previous next »