« previous next »
Pages: [1]

Author Topic: Titebond Hide glue?  (Read 2822 times)

0 Members and 2 Guests are viewing this topic.

Offline snag

  • Member
  • Posts: 419
Titebond Hide glue?
« on: February 12, 2011, 10:33:31 pm »
I was looking at a website that has all sorts of woodworking tools and stuff. I wondered into the glue area and say Titebond liquid hide glue...? Has anyone used this before? Any good? It says you don't have to heat it to apply....?
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline Timo

  • Member
  • Posts: 2,026
Re: Titebond Hide glue?
« Reply #1 on: February 12, 2011, 10:36:56 pm »
Good for certain applications, the only problem with it is it does have a shelf life. I never buy it unless I can test it myself.
Logged

Offline toomanyknots

  • Member
  • Posts: 3,132
Re: Titebond Hide glue?
« Reply #2 on: February 12, 2011, 11:07:27 pm »
I remember reading something that said it has something in it to keep it liquid that you generally dont want in your hide glue. Dont qoute me on that though.   8)
Logged
"The way of heaven is like the bending of a bow-
 the upper part is pressed down,
 the lower part is raised up,
 the part that has too much is reduced,
 the part that has too little is increased."

- Tao Te Ching, 77, A new translation by Victor H. Mair

Offline snag

  • Member
  • Posts: 419
Re: Titebond Hide glue?
« Reply #3 on: February 13, 2011, 01:30:56 pm »
Good to know. Somethings you just can't improve on I guess. Thanks, David
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Titebond Hide glue?
« Reply #4 on: February 13, 2011, 01:47:51 pm »
Snag, I was looking through a new Grizzley tool catalog the other day and found powdered hide glue in the instrument building section. Pretty reasonable too.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: Titebond Hide glue?
« Reply #5 on: February 13, 2011, 07:22:52 pm »
I bought a can of powdered hide glue in a can from a wood working store. I have not used any of it yet but it was fairly cheap.
Logged
There are no bad knappers, only bad flakes

Offline snag

  • Member
  • Posts: 419
Re: Titebond Hide glue?
« Reply #6 on: February 13, 2011, 11:27:22 pm »
I'll have to see if Woodcrafters has some next time I'm in there.
Logged
Is. 49:2 ....He made me a polished arrow and concealed me in His quiver.

Offline sweeney3

  • Member
  • Posts: 277
Re: Titebond Hide glue?
« Reply #7 on: February 14, 2011, 12:46:24 am »
I have used Titebond 3 with rawhide backings with pretty good results.  Haven't yet tried it for anything else.  I think, think Ed Scott might use it with sinew, judging by the color from his videos, but please don't quote me on that.
Logged

Offline rossfactor

  • Member
  • Posts: 805
  • Humboldt County CA
Re: Titebond Hide glue?
« Reply #8 on: February 14, 2011, 01:21:20 am »
In my opinion Tite bond hide glue is wonderful for fabric backings: silk, linnet etc.  As long as you have a good water resistant finish to put over it.  It has a slow set time,  you can work out kinks by re-hydrating the problem area, it dries hard and flexible.  I dig the stuff, but make sure you apply a good finish when your done.

Gabe
Logged
Humboldt County CA.

Offline Gordon

  • Member
  • Posts: 3,299
Re: Titebond Hide glue?
« Reply #9 on: February 14, 2011, 03:48:31 am »
It's the cat's meow for doing snake skin and rawhide backing. Store it in the refrigerator when not in use and it will keep a long time.
Logged
Gordon
Pages: [1]
« previous next »