« previous next »
Pages: [1]

Author Topic: Wood pith possible prob.  (Read 1715 times)

0 Members and 1 Guest are viewing this topic.

Offline SiongSA

  • Member
  • Posts: 96
Wood pith possible prob.
« on: February 03, 2011, 01:04:29 pm »
Hey guys,
just like to ask a question, in sapling bow i'm currently working on, the bows thickness happens to be on the pith of the bow so there's about a 30cm long, 1-2mm deep fissure on the belly of the bow, cause i took out the soft pith. I've bent the bow alot and there's not even a creak not even the slightest crack but i was wondering if maybe i should fill it with possibly a glue thats good in compression, or beeswax?

Any suggestions welcome, Sion
South Africa
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Wood pith possible prob.
« Reply #1 on: February 03, 2011, 01:25:48 pm »
I have seen pictures of native american bows with a pith groove down the center of the belly. 
Logged
I started out with nothin' and I still got most of it left

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Wood pith possible prob.
« Reply #2 on: February 03, 2011, 01:27:55 pm »
Just leave it... or carefully scrape it out leaving a nice feature.
Longitudinal features are seldom a prblem.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline SiongSA

  • Member
  • Posts: 96
Re: Wood pith possible prob.
« Reply #3 on: February 03, 2011, 01:53:44 pm »
Thank goodness, cheers guys
Logged

Offline Keenan

  • Member
  • Posts: 4,824
Re: Wood pith possible prob.
« Reply #4 on: February 03, 2011, 07:08:44 pm »
Just leave it. Won't cause a problem and can look real cool as well.

Logged
Pages: [1]
« previous next »