« previous next »
Pages: [1]

Author Topic: Flinchlock priming horn  (Read 3897 times)

0 Members and 2 Guests are viewing this topic.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Flinchlock priming horn
« on: January 23, 2011, 04:30:33 pm »
 I saw one of these at the Rendevous yesterday and thought I could make one. Well, I found a couple of these old butter knives for a quarter at the flea market this morning and thought I'd give it a try. This is what I came up with. This one's going to a good buddy in South Carolina that is always making me some cool stuff.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Flinchlock priming horn
« Reply #1 on: January 23, 2011, 04:39:37 pm »
Very cool Eddie. Chris will love it!  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Flinchlock priming horn
« Reply #2 on: January 23, 2011, 05:50:53 pm »
 Thanks, Pat.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Flinchlock priming horn
« Reply #3 on: January 23, 2011, 06:27:30 pm »
Are the blades just soldered into the handle?  What did you use for the nipple?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Flinchlock priming horn
« Reply #4 on: January 23, 2011, 06:50:28 pm »
 Pat,  The blades are soldered in with silver solder. I bought some brass tubing from Ace Hardware and mounted it through buffalo horn and epoxied on the handle.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline nugget

  • Member
  • Posts: 1,995
  • I see, I hunt, I shoot, I eat
Re: Flinchlock priming horn
« Reply #5 on: January 23, 2011, 07:03:30 pm »
Very cool way to recycle
Logged
Life is not a journey to the grave with the intentions of arriving safely in a pretty and well preserved body. But rather to slide in sideways, thoroughly used up, totally worn out and loudly proclaiming....WOW WHAT A RIDE!!

Offline stickbender

  • Member
  • Posts: 3,828
Re: Flinchlock priming horn
« Reply #6 on: January 24, 2011, 12:18:11 am »

     Dang, that's slick.  I have a spring loaded priming nipple from Dixie arms.  I just may have to try that.  That's cool.

                                                                                 Wayne
Logged

Offline Bevan R.

  • Member
  • Posts: 1,691
Re: Flinchlock priming horn
« Reply #7 on: January 24, 2011, 12:54:58 am »
All I can say is WOW :o :o
Logged
Bowmakers are a little bent, but knappers are just plain flaky.

Offline RidgeRunner

  • Member
  • Posts: 1,153
Re: Flinchlock priming horn
« Reply #8 on: January 24, 2011, 09:35:18 am »
So... Was the handle hollow or did you have to drill it out?

David
Logged
David Key / N.W. Alabama

Offline Hillbilly

  • Member
  • Posts: 8,248
  • I like tater tots.
Re: Flinchlock priming horn
« Reply #9 on: January 24, 2011, 09:45:31 am »
Very cool, Eddie.
Logged
Smoky Mountains, NC

NeolithicHillbilly@gmail.com

Progress might have been all right once but it's gone on for far too long.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Flinchlock priming horn
« Reply #10 on: January 24, 2011, 12:18:54 pm »
 David, the handles are hollow. I had to melt the silver solder out. Steve, I'm going back to the Flea market next weekend. If the other two knives are there you'll have one coming, too.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline HickoryBill

  • Member
  • Posts: 785
Re: Flinchlock priming horn
« Reply #11 on: January 24, 2011, 09:19:54 pm »
Very cool. I've been thinking of making one to go with my old Betsy, my 45 caliber Kentucky longrifle I built from a kit.
Logged
"He who hesitates usually misses"
"All you really need to make a bow and arrow are some sticks and a deer carcass"
Bill Stockdill
Clarion County Pennsylvania

Offline JW_Halverson

  • Member
  • Posts: 11,916
Re: Flinchlock priming horn
« Reply #12 on: January 24, 2011, 09:24:36 pm »
Nice "re-purposing" of old scrap.  As soon as I saw the pic with the spattergob of solder I figured out how it was done, cool!  I have a pair of antelope horns that I have been waiting to turn into a matched pair of primers, maybe I need to get them finished.

Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: Flinchlock priming horn
« Reply #13 on: January 24, 2011, 10:37:19 pm »
 Antelope horns would be perfect.
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline JW_Halverson

  • Member
  • Posts: 11,916
Re: Flinchlock priming horn
« Reply #14 on: January 24, 2011, 10:56:14 pm »
I've made two in the past.  The secret to getting them to last is large bottles of the thinnest superglue available.  Since they are not much more than compacted hair, they break down fast otherwise.  And they are really porous....leads to wet powder problems.
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.
Pages: [1]
« previous next »