« previous next »
Pages: [1]

Author Topic: Trade Points?  (Read 5479 times)

0 Members and 1 Guest are viewing this topic.

Cacatch

  • Guest
Trade Points?
« on: January 07, 2011, 11:30:46 am »
Does anybody have any trade points they'd like to get rid of? I'd like to make a few turkey whacker arrows for this spring. If so, what would you be looking for in trade?

Thanks,
CP
Logged

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: Trade Points?
« Reply #1 on: January 07, 2011, 12:15:11 pm »
I've got a good bit of bandsaw blade that makes real good trade points if you'd like to cut some out yourself.
Logged
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Cacatch

  • Guest
Re: Trade Points?
« Reply #2 on: January 07, 2011, 12:53:29 pm »
Do you just cut out the lengths with a hacksaw Jonathan?

Logged

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: Trade Points?
« Reply #3 on: January 07, 2011, 01:19:46 pm »
I just break the blade to shorten it.  I cut out the points with a dremel tool.  I've annealed all this, so you'd have to heat treat it, but after you do that it'll hold a razor sharp edge really well.  Makes pretty good lightweight knives, too.
Logged
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Cacatch

  • Guest
Re: Trade Points?
« Reply #4 on: January 07, 2011, 03:58:09 pm »
I've never worked with bandsaw blades for points before - how do you break it? Put it in a vice with the length you want sticking out and whack it off?

Also, what would you be interested in for trade?

CP
Logged

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: Trade Points?
« Reply #5 on: January 07, 2011, 04:45:28 pm »
Just bend it back and forth a couple of times at the length you want and it'll snap.  Of course, this is easier with longer lengths.  I just break it down to smaller pieces for storage and cut what I want from there.
Logged
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Cacatch

  • Guest
Re: Trade Points?
« Reply #6 on: January 07, 2011, 04:47:07 pm »
Sounds pretty good. What would you want in trade?

Logged

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: Trade Points?
« Reply #7 on: January 07, 2011, 04:51:58 pm »
I'm open to pretty much anything.  I do need some sinew if you've got any, but I'm really not picky.
Logged
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Cacatch

  • Guest
Re: Trade Points?
« Reply #8 on: January 07, 2011, 04:53:28 pm »
What's your sinew for and how much for enough stock to make 10 points about 1.5" long?

Logged

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: Trade Points?
« Reply #9 on: January 07, 2011, 05:32:07 pm »
Just need some to haft a half dozen or so points on, don't need too much.
Logged
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Cacatch

  • Guest
Re: Trade Points?
« Reply #10 on: January 07, 2011, 05:43:14 pm »
Ok. Sounds more than reasonable. Let me look at my stash and see how much I have. I'll get back to you on it Monday. Thanks.

CP
Logged

Offline jonathan creason

  • Member
  • Posts: 1,122
Re: Trade Points?
« Reply #11 on: January 07, 2011, 05:45:52 pm »
Sounds good.
Logged
Cleveland, NC

"The only thing cooler than bands that gets lots of chicks are bands that scare chicks." - Beavis

Offline aznboi3644

  • Member
  • Posts: 802
Re: Trade Points?
« Reply #12 on: January 07, 2011, 09:52:04 pm »
what kind of bandsaw blade do you have that snaps if bent?
Logged

Offline Fred Arnold

  • Member
  • Posts: 1,566
  • From up on Munson Creek
Re: Trade Points?
« Reply #13 on: January 08, 2011, 02:03:35 am »
I may have a few that won't be used.  Probably average 150gr.
How many do you need?
I'm not in a rush to gid rid of em, but if you need em, We'll figure out a trade.
I normally only use em on my canes but have been thinking about trying some on my woodies.
Takes a lot of effort to make a good hunting arrow.
Logged
I found many years ago that it is much easier and more rewarding working with those that don't know anything than those that know it all.
Pages: [1]
« previous next »