« previous next »
Pages: [1]

Author Topic: grain? for ERC  (Read 1504 times)

0 Members and 1 Guest are viewing this topic.

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
grain? for ERC
« on: December 10, 2010, 09:53:28 pm »
On my eastern red cedar stave.  I was wondering do I need to try and follow the grain on the sides Or just get my shape I need.  It is very hard to see the longitudinal grain.  I am going to leave the sap wood on and try to make it 50/50 sapwood/heartwood.  I also plan to back it with rawhide or sinew.  Going for a overbuilt bow.  Any suggestion would help me.  Thanks 
Logged
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline bcbull

  • Member
  • Posts: 541
Re: grain? for ERC
« Reply #1 on: December 10, 2010, 11:01:37 pm »
bettle  dont worry bout the grain  on sides    just get the shape u need  id back it befor i tiller  brock
Logged

Offline beetlebailey1977

  • Member
  • Posts: 1,153
    • Bowhunters of South Carolina
Re: grain? for ERC
« Reply #2 on: December 10, 2010, 11:28:05 pm »
ok thats what I wanted to know....I am going to stay as close as possible with the grain but it is very hard to tell on the sapwood.  I will rough it close, back then final tiller.  I hope it works out.
Logged
Happy hunting to all!
Bowhunters of South Carolina Executive council member
Professional Bowhunters Society Associate member

Reevesville, SC     James V. Bailey II

Offline bcbull

  • Member
  • Posts: 541
Re: grain? for ERC
« Reply #3 on: December 11, 2010, 01:42:23 pm »
YA SHOULD BE FINE BRO IV NEVER WORRIED ABOUT THE RING S OR GRAIN ON ERC SAP  BROCK
Logged
Pages: [1]
« previous next »